Series 31U
A. Modular Design: All Bray manual gear operators, electric and pneumatic actuators mount directly to the S31U, with no brackets required.
View detail →
Valve Plaza — distributor of Bray valves, butterfly valves, ball valves, actuators and control accessories in stock, global valves for water, HVAC, chemical, power industries, with quick dispatch worldwide.
One partner for Bray valves and actuators — from selection to after-sales support.
Authorised distributor of Bray products sourced through the genuine channel. ISO 9001 certified manufacturing and PED 2014/68/EU compliant pressure equipment, with EN 10204 3.1 material certificates available with delivery.
Send your media, pressure and temperature conditions and an engineer checks the selection line by line, recommends alternatives where they save cost, and replies with price and lead time within one business day.
Every model page documents sizes, materials, pressure ratings and connections, so you can shortlist without emailing first — and match documentation scope before you order.
From resilient seated butterfly valves to electric actuators — every family documented model by model.
Not sure where to start? These are the duties we quote most often.
Bubble-tight isolation for large bore low pressure lines, wafer to double flanged.
Butterfly valves →Lined bodies, PTFE seats and full port bores for aggressive process fluids.
Ball valves →Bi-directional knife gate valves and pinch valves for abrasive, dense media.
Knife gate valves →Characterised discs and rotary control valves for accurate flow throttling.
Control valves →Pneumatic, electric and electro-hydraulic actuation with sizing support.
Actuators →Silent check, ball check and relief valves that protect pumps and lines.
Check valves →A rotating pick from the range. Open a model for the full specification and capacity charts.
A. Modular Design: All Bray manual gear operators, electric and pneumatic actuators mount directly to the S31U, with no brackets required.
View detail →A. Stem Design: High-strength, one-piece stem design is standardized for interchangeability of Bray actuators.
View detail →A. Fully PFA lined disc and body: Proprietary compound provides unsurpassed resistance to corrosion, permeation, and microbial contamination for maximum purity and reliability with minimum maintenance.
View detail →A. Enclosure: The compact low profile weatherproof VSM is UL certified NEMA Type 4, 4x and IP66/67/68. Aluminum base and cover for exceptional corrosion, wear and impact resistance.
View detail →A. Blow-out Proof Stem: A retaining ring, installed between the machined stem groove and gland retainer step, provides full retention of the stem in the unlikely event of internal stem failure.
View detail →Two-piece bolted flanged body adds design strength and enables fast, easy maintenance
View detail →The Bray Tank Series — TKF15 two-piece and TK7000/TK8000 three-piece full port ball valves — is engineered for industry requirements at bottom drain locations of autoclaves, reactors, pressure vessels and storage tanks, enabling fast, unobstructed tank drainage. Tank Series valves feature zero leakage sealing, continuously loaded packing and an integral cast top mounting flange for easy actuator installation, in a rugged, durable construction with low operating torque and long service life. The two-piece TKF15 Tank Series offers a close-coupled tank-bottom design with flat-bottom tank welding connections and ASME B16.5 pipeline flanged connections — an economical solution for large tanks from NPS 2-1/2" to 10". The three-piece TK7000/TK8000 features a swing-out body for clean-in-place and inline maintenance, with extensive end connection options including flanged, threaded, socket weld, extended socket, butt weld, extended butt weld, clamp and pipe-end/extended pipe-end for maximum flexibility.
View detail →A. Blow-out Proof Stem: A retaining ring, installed between the machined stem groove and gland retainer step, provides full retention of the stem in the unlikely event of internal stem failure.
View detail →Zero emission capability; fully self-contained
View detail →The Bray Media Containment Unit (MCU) provides unmatched sealing performance for high-cycle, cryogenic, high-temperature and steam ball valve applications — with greater safety, environmental protection, operational reliability and compliance with environmental standards. The MCU is designed to prevent accidental and undesirable emissions, leaks or discharges. Should the primary seal fail, the MCU's secondary seal prevents leakage, and the MCU's side ports can be used for fugitive emission monitoring, leak detection, emission capture, positive sealing and an emergency repair facility allowing sealant injection via a button-head fitting. Investment cast in corrosion-resistant stainless steel for harsh environments, the MCU is offered in sizes 1/4" to 10" (6.35 mm to 254 mm) and can be factory pre-installed on Triad, Series 7000/8000, S7500/S7700, F15/F30, RF15/RF30 and S85 valves, or retrofitted by simple field installation. With the MCU, industrial operators can significantly reduce operating costs and unplanned LDAR maintenance events, cutting downtime and improving productivity.
View detail →The Bray Series 35F large-diameter elastomer-seated butterfly valve is designed for high-chloride applications and is NSF certified for drinking water. Bray carefully selects valve materials and applies a unique design to optimise performance without sacrificing system efficiency. The 35F delivers solid reliability in a lightweight package with excellent flow control.
View detail →A. Stem Cover: Protective stem cover is standard increasing cycle life in hazardous environments.
View detail →Send us what you know — we handle the engineering.
Equipment type, steam pressure, condensate load and connection size — a short note is enough.
An engineer checks the selection and sizing against the Bray capacity charts, then confirms with you.
You receive a quotation with delivery schedule and documentation scope within one business day.
Selection and troubleshooting knowledge from working with steam systems.
Live steam loss, cold equipment, waterhammer and cycling noise all point to different failure modes.
Read article →Seat material, body style and pressure class decide most of the specification. A practical checklist for buyers.
Read article →Send your specification and we will reply within one business day.