Series 31H Resilient Seated Butterfly Valve
The Bray Series 31H lug-style elastomer-seated butterfly valve is drilled and machined to ASME Class 125/150 and PN16 flange standards. This rugged valve features a high-strength one-piece stem design with an effective.
| Size Range | NPS 2 to 20 / DN 50 to 500 |
|---|---|
| Body Materials | Cast Iron, Ductile Iron |
| Temperature Range | -20°F to 250°F (-29°C to 121°C) |
| Stem Materials | 416 Stainless Steel |
| Plazo de entrega | 7–15 días |
|---|---|
| Pedido mínimo | ≥1 |
Especificaciones técnicas
The Bray Series 31H lug-style elastomer-seated butterfly valve is drilled and machined to ASME Class 125/150 and PN16 flange standards. This rugged valve features a high-strength one-piece stem design with an effective internal disc-to-stem connection.
Primary and secondary seals between disc and seat and between stem and seat fully encapsulate the line media, delivering zero external leakage. A durable polyester coating protects the valve in aggressive environments, making the 31H a dependable choice for demanding applications.
| Size Range | NPS 2 to 20 / DN 50 to 500 |
|---|---|
| Body Materials | Cast Iron, Ductile Iron |
| Temperature Range | -20°F to 250°F (-29°C to 121°C) |
| Stem Materials | 416 Stainless Steel |
| Maximum Allowable Operating Pressure | 250 psi (17.2 Bar) |
| Seat Materials | Bonded EPDM, Bonded BUNA-N |
| Shutoff Rating | Bidirectional Bubble-tight |
| Disc Materials | Nylon 11 Coated Ductile Iron, Aluminum Bronze, Stainless Steel |
| Body Style | Lug |
| Testing Standard | MSS SP-61, API 598, EN 12266-1, ISO 5208 |
| Certifications | ABS, ATEX, CRN, DNV, NSF 61/372, PED, PE(S)R, SIL, TR CU |
| Face to Face | MSS SP-67, API 609 Category A, EN 558 Series 20 |
| Flange Drilling | ASME B16.1 Class 125, ASME B16.5 Class 150, EN 1092 PN16 |
| applications | High Pressure, HVAC, Dead-End service |
Características y ventajas
- A. Stem Retaining Assembly: The stem is retained in the body by means of a unique stainless steel Spirolox® retaining ring, a thrust washer and two C-rings, manufactured from brass as standard, stainless steel upon request.
- B. Stem Bushing: Non-corrosive, heavy duty acetal bushing absorbs actuator side thrust.
- C. Stem Seal: Double “U” cup seal design is self-adjusting and gives positive sealing in both directions.
- D. Primary And Secondary Seals: These seals prevent line media from coming in contact with the stem or body. The primary seal is an interference fit of the molded seat flat with the disc hub. The secondary seal is created because the stem diameter is greater than the diameter of the seat stem hole.
- E. Body: One piece lug style. Polyester coating for excellent corrosion resistance. Nylon 11 coating is available as an option.
- F. Seat: Bray’s tongue and groove seat design provides complete isolation of flowing media from the body. The seat also features a molded o-ring which eliminates the use of flange gaskets.
- G. Disc: Casting is spherically machined and hand polished to provide a bubble tight shutoff, with minimum torque, and longer seat life. Bray’s resilient Nylon 11 coating comes as standard.
- H. Stem: Precision double “D” disc to stem connection drives the disc without the need for screws or pins. The close tolerance, double “D” connection that drives the valve disc is an exclusive feature of the Bray valve. Disassembly of the Bray stem is just a matter of pulling the stem out of the disc.
Solicitar cotización de Series 31H Resilient Seated Butterfly Valve
Indique medidas, tipo de conexión y condiciones de servicio. Respondemos con precio, plazo y alcance documental dentro de un día hábil.