Vannes, actionneurs et instrumentation Bray pour acheteurs industriels
Series 31H Resilient Seated Butterfly Valve

Series 31H Resilient Seated Butterfly Valve

The Bray Series 31H lug-style elastomer-seated butterfly valve is drilled and machined to ASME Class 125/150 and PN16 flange standards. This rugged valve features a high-strength one-piece stem design with an effective.

Series 31Hmodèle
Butterfly Valvesfamille
Braymarque
Spécifications clés
Size Range NPS 2 to 20 / DN 50 to 500
Body Materials Cast Iron, Ductile Iron
Temperature Range -20°F to 250°F (-29°C to 121°C)
Stem Materials 416 Stainless Steel
Informations de commande
Délai de livraison7–15 jours
Commande minimum≥1

Spécifications techniques

The Bray Series 31H lug-style elastomer-seated butterfly valve is drilled and machined to ASME Class 125/150 and PN16 flange standards. This rugged valve features a high-strength one-piece stem design with an effective internal disc-to-stem connection.

Primary and secondary seals between disc and seat and between stem and seat fully encapsulate the line media, delivering zero external leakage. A durable polyester coating protects the valve in aggressive environments, making the 31H a dependable choice for demanding applications.

Size Range NPS 2 to 20 / DN 50 to 500
Body Materials Cast Iron, Ductile Iron
Temperature Range -20°F to 250°F (-29°C to 121°C)
Stem Materials 416 Stainless Steel
Maximum Allowable Operating Pressure 250 psi (17.2 Bar)
Seat Materials Bonded EPDM, Bonded BUNA-N
Shutoff Rating Bidirectional Bubble-tight
Disc Materials Nylon 11 Coated Ductile Iron, Aluminum Bronze, Stainless Steel
Body Style Lug
Testing Standard MSS SP-61, API 598, EN 12266-1, ISO 5208
Certifications ABS, ATEX, CRN, DNV, NSF 61/372, PED, PE(S)R, SIL, TR CU
Face to Face MSS SP-67, API 609 Category A, EN 558 Series 20
Flange Drilling ASME B16.1 Class 125, ASME B16.5 Class 150, EN 1092 PN16
applications High Pressure, HVAC, Dead-End service

Caractéristiques et avantages

  • A. Stem Retaining Assembly: The stem is retained in the body by means of a unique stainless steel Spirolox® retaining ring, a thrust washer and two C-rings, manufactured from brass as standard, stainless steel upon request.
  • B. Stem Bushing: Non-corrosive, heavy duty acetal bushing absorbs actuator side thrust.
  • C. Stem Seal: Double “U” cup seal design is self-adjusting and gives positive sealing in both directions.
  • D. Primary And Secondary Seals: These seals prevent line media from coming in contact with the stem or body. The primary seal is an interference fit of the molded seat flat with the disc hub. The secondary seal is created because the stem diameter is greater than the diameter of the seat stem hole.
  • E. Body: One piece lug style. Polyester coating for excellent corrosion resistance. Nylon 11 coating is available as an option.
  • F. Seat: Bray’s tongue and groove seat design provides complete isolation of flowing media from the body. The seat also features a molded o-ring which eliminates the use of flange gaskets.
  • G. Disc: Casting is spherically machined and hand polished to provide a bubble tight shutoff, with minimum torque, and longer seat life. Bray’s resilient Nylon 11 coating comes as standard.
  • H. Stem: Precision double “D” disc to stem connection drives the disc without the need for screws or pins. The close tolerance, double “D” connection that drives the valve disc is an exclusive feature of the Bray valve. Disassembly of the Bray stem is just a matter of pulling the stem out of the disc.

Demander un devis pour Series 31H Resilient Seated Butterfly Valve

Indiquez dimensions, type de raccordement et conditions de service. Réponse avec prix, délai et périmètre documentaire sous un jour ouvré.

Recently viewed

Besoin d'un devis ou d'une fiche technique ?

Envoyez votre cahier des charges, réponse sous un jour ouvré.

Demander un devis