Vannes, actionneurs et instrumentation Bray pour acheteurs industriels
Series 3A/3AH Resilient Seated Butterfly Valve

Series 3A/3AH Resilient Seated Butterfly Valve

The Bray Series 3A/3AH double flanged elastomer-seated butterfly valve is highly suited to dead-end service, with shut-off to 250 psi. International compatibility is a key design advantage of Bray's modular valve line..

Series 3A/3AHmodèle
Butterfly Valvesfamille
Braymarque
Spécifications clés
Size Range NPS 2 to 20 / DN 50 to 500
Body Materials Cast Iron, Ductile Iron, Carbon Steel
Temperature Range -20°F to 400°F (-29°C to 204°C)
Stem Materials Stainless Steel, Monel K500
Informations de commande
Délai de livraison7–15 jours
Commande minimum≥1

Spécifications techniques

The Bray Series 3A/3AH double flanged elastomer-seated butterfly valve is highly suited to dead-end service, with shut-off to 250 psi. International compatibility is a key design advantage of Bray's modular valve line.

The valve complies with most international flange standards — ASME Class 125/150, BS 10 Tables D and E, BS 4504 NP 10/16, AS 2129 and JIS 10. The 3A/3AH also meets ISO 5752 Table 2 (EN558 Table 13) face-to-face dimensions and the ISO 5211 actuator mounting flange, making the series widely usable across global markets.

Size Range NPS 2 to 20 / DN 50 to 500
Body Materials Cast Iron, Ductile Iron, Carbon Steel
Temperature Range -20°F to 400°F (-29°C to 204°C)
Stem Materials Stainless Steel, Monel K500
Maximum Allowable Operating Pressure Series 3A: 175 psi (12 bar); Series 3AH: 250 psi (16 bar)
Seat Materials Bonded EPDM, Bonded BUNA-N, Bonded FKM
Shutoff Rating Bidirectional Bubble-tight
Disc Materials Nylon 11 Coated Ductile Iron, Aluminum Bronze, Stainless Steel
Body Style Double Flanged
Flange Drilling ASME B16.1 Class 125, ASME B16.5 Class 150, EN 1092 PN 10, 16
Testing Standard MSS SP-61, API 598, EN 12266-1
Certifications ABS, ATEX, Bureau Veritas, China Classification Society (CCS), DNV, PED, PE(S)R, SIL
Face to Face API 609 Category B short patern, EN 558 Series 13
applications Wastewater, Seawater, Water, other liquids and gases

Caractéristiques et avantages

  • A. Stem: Precision double "D" disc to stem connection drives the disc without the need of screws or pins.
  • B. Seat: Bray's bonded seat design lowers torque and provides complete isolation of flowing media from the body. The seat also features a molded O-ring which eliminates the use of flange gaskets.
  • C. Stem Retaining Assembly: The stem is retained in the body by means of a unique Stainless Steel Spirolox® retaining ring, a thrust washer and two C-rings, manufactured from brass as standard, stainless steel upon request. The retaining ring may be easily removed with a standard hand tool. The stem retaining assembly prevents unintentional removal of the stem during field service.
  • D. Stem Bushing: Non-corrosive, heavy duty acetal bushing absorbs actuator side thrusts.
  • E. Stem Seal: Double "U" cup seal design is self-adjusting, gives positive sealing in both directions, and prevents external substances from entering the stem bore.
  • F. Extended Neck: Extended neck length allows for 2" (50 mm) of piping insulation and is easily accessible for mounting actuators.
  • G. Primary & Secondary Seals: These seals prevent line media from coming in contact with the stem or body. Primary Seal is achieved by an interference fit of the molded seat flat with the disc hub. Secondary Seal is created because the stem diameter is greater than the diameter of the seat stem hole.
  • H. Disc: Spherically machined and hand polished to provide a bubble-tight shutoff, minimum torque, and longer seat life.

Demander un devis pour Series 3A/3AH Resilient Seated Butterfly Valve

Indiquez dimensions, type de raccordement et conditions de service. Réponse avec prix, délai et périmètre documentaire sous un jour ouvré.

Recently viewed

Besoin d'un devis ou d'une fiche technique ?

Envoyez votre cahier des charges, réponse sous un jour ouvré.

Demander un devis