Series 3A/3AH Resilient Seated Butterfly Valve
The Bray Series 3A/3AH double flanged elastomer-seated butterfly valve is highly suited to dead-end service, with shut-off to 250 psi. International compatibility is a key design advantage of Bray's modular valve line..
| Size Range | NPS 2 to 20 / DN 50 to 500 |
|---|---|
| Body Materials | Cast Iron, Ductile Iron, Carbon Steel |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Stem Materials | Stainless Steel, Monel K500 |
| مدة التسليم | 7–15 يومًا |
|---|---|
| الحد الأدنى للطلب | ≥1 |
المواصفات الفنية
The Bray Series 3A/3AH double flanged elastomer-seated butterfly valve is highly suited to dead-end service, with shut-off to 250 psi. International compatibility is a key design advantage of Bray's modular valve line.
The valve complies with most international flange standards — ASME Class 125/150, BS 10 Tables D and E, BS 4504 NP 10/16, AS 2129 and JIS 10. The 3A/3AH also meets ISO 5752 Table 2 (EN558 Table 13) face-to-face dimensions and the ISO 5211 actuator mounting flange, making the series widely usable across global markets.
| Size Range | NPS 2 to 20 / DN 50 to 500 |
|---|---|
| Body Materials | Cast Iron, Ductile Iron, Carbon Steel |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Stem Materials | Stainless Steel, Monel K500 |
| Maximum Allowable Operating Pressure | Series 3A: 175 psi (12 bar); Series 3AH: 250 psi (16 bar) |
| Seat Materials | Bonded EPDM, Bonded BUNA-N, Bonded FKM |
| Shutoff Rating | Bidirectional Bubble-tight |
| Disc Materials | Nylon 11 Coated Ductile Iron, Aluminum Bronze, Stainless Steel |
| Body Style | Double Flanged |
| Flange Drilling | ASME B16.1 Class 125, ASME B16.5 Class 150, EN 1092 PN 10, 16 |
| Testing Standard | MSS SP-61, API 598, EN 12266-1 |
| Certifications | ABS, ATEX, Bureau Veritas, China Classification Society (CCS), DNV, PED, PE(S)R, SIL |
| Face to Face | API 609 Category B short patern, EN 558 Series 13 |
| applications | Wastewater, Seawater, Water, other liquids and gases |
الميزات والمزايا
- A. Stem: Precision double "D" disc to stem connection drives the disc without the need of screws or pins.
- B. Seat: Bray's bonded seat design lowers torque and provides complete isolation of flowing media from the body. The seat also features a molded O-ring which eliminates the use of flange gaskets.
- C. Stem Retaining Assembly: The stem is retained in the body by means of a unique Stainless Steel Spirolox® retaining ring, a thrust washer and two C-rings, manufactured from brass as standard, stainless steel upon request. The retaining ring may be easily removed with a standard hand tool. The stem retaining assembly prevents unintentional removal of the stem during field service.
- D. Stem Bushing: Non-corrosive, heavy duty acetal bushing absorbs actuator side thrusts.
- E. Stem Seal: Double "U" cup seal design is self-adjusting, gives positive sealing in both directions, and prevents external substances from entering the stem bore.
- F. Extended Neck: Extended neck length allows for 2" (50 mm) of piping insulation and is easily accessible for mounting actuators.
- G. Primary & Secondary Seals: These seals prevent line media from coming in contact with the stem or body. Primary Seal is achieved by an interference fit of the molded seat flat with the disc hub. Secondary Seal is created because the stem diameter is greater than the diameter of the seat stem hole.
- H. Disc: Spherically machined and hand polished to provide a bubble-tight shutoff, minimum torque, and longer seat life.
اطلب عرض سعر لـ Series 3A/3AH Resilient Seated Butterfly Valve
أرسل المقاسات ونوع الاتصال وظروف التشغيل. نرد بالسعر ومدة التسليم ونطاق الوثائق خلال يوم عمل واحد.