Series 1B Trunnion Mounted Ball Valve
The Bray trunnion mounted ball valve combines advanced sealing technology with rugged construction for critical pipeline service. - ISO 5211 mounting pad for easy automation - Emergency stem sealant injection: a.
| Size Range | 2 to 24" (50 – 600mm) |
|---|---|
| Body Materials | ASTM A105, ASTM A350 Gr. LF2, ASTM A182 Gr F316 |
| Temperature Range | -50 to 600°F (-45 to 315°C) |
| Stem Materials | ASTM A479 Type 410; 17-4PH; XM-19; ASTM A182 F316 |
| مدة التسليم | 7–15 يومًا |
|---|---|
| الحد الأدنى للطلب | ≥1 |
المواصفات الفنية
The Bray trunnion mounted ball valve combines advanced sealing technology with rugged construction for critical pipeline service.
- ISO 5211 mounting pad for easy automation
- Emergency stem sealant injection: a standard feature allowing sealant injection through the stem housing in emergencies
- Optional emergency seat sealant injection at the end connections to handle seat leakage from debris or upset conditions
- Drain and vent ports: the drain port at the bottom of the body releases trapped cavity liquid; the vent port at the top releases trapped gas — essential in double block & bleed and double isolation & bleed configurations
- Double block & bleed relieves cavity pressure build-up even with the valve fully closed
- Fire-safe design: secondary metal seats provide API 607 fire-safe shut-off, with secondary graphite stem and body packing preventing leakage
- Trunnion design: upper and lower bearing plates hold the ball in position, preventing axial float and seat overload; external trunnions on some sizes
- Pressure-responsive stem packing: a patented energiser ring above the primary O-ring stem packing uses line pressure to increase packing load in the rare event of O-ring damage
- Dual body joint seals: primary resilient stem packing for zero leakage in standard service; secondary graphite packing to API 607 at extreme temperatures
- Anti-static devices ensure electrical continuity between ball, stem and body, preventing static discharge
- Valve position indicator clearly stamped on the mounting flange identifies open/closed position
- Blowout-proof stem design prevents stem ejection under line pressure
| Size Range | 2 to 24" (50 – 600mm) |
|---|---|
| Body Materials | ASTM A105, ASTM A350 Gr. LF2, ASTM A182 Gr F316 |
| Temperature Range | -50 to 600°F (-45 to 315°C) |
| Stem Materials | ASTM A479 Type 410; 17-4PH; XM-19; ASTM A182 F316 |
| Maximum Allowable Operating Pressure | ASME CL150, 300, 600, 900, 1500 |
| Seat Materials | RPTFE, Nylon, Devlon, PEEK, Tek-Fil, TFM |
| Shutoff Rating | Zero Leakage |
| Ball Materials | ASTM A105 w/ENP; ASTM A350 Gr. LF2 w/ENP; ASTM A182 Gr. F316; ASTM A182 Gr. F316 w/ENP |
| Body Style | Two Piece, Three Piece |
| Design Standard | API 6D, ASME B16.34 |
| End Connections | Flanged, Butt Weld |
| Testing Standard | API 598, API 6D |
| Certifications | API 607, ISO 15848-1 |
| Ports | Full |
| Face to Face | ASME B16.10 |
| Fugitive Emissions Standard | ISO 15848-1, ISO 15848-2 |
| applications | Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals, Emergency Shutdown, Suction and Discharge Isolation, Block and Bypass, Pumping, Compression and Reinjection Units, Metering Stations, Pig Traps, Surge-Relief Skids, Decoking Isolation, Buried Services, Produced Water (Brine) Services |
الميزات والمزايا
- ISO 5211 mounting pad for easy automation
- Emergency stem sealant injection: a standard feature allowing sealant injection through the stem housing in emergencies
- Optional emergency seat sealant injection at the end connections to handle seat leakage from debris or upset conditions
- Drain and vent ports: the drain port at the bottom of the body releases trapped cavity liquid; the vent port at the top releases trapped gas — essential in double block & bleed and double isolation & bleed configurations
- Double block & bleed relieves cavity pressure build-up even with the valve fully closed
- Fire-safe design: secondary metal seats provide API 607 fire-safe shut-off, with secondary graphite stem and body packing preventing leakage
- Trunnion design: upper and lower bearing plates hold the ball in position, preventing axial float and seat overload; external trunnions on some sizes
- Pressure-responsive stem packing: a patented energiser ring above the primary O-ring stem packing uses line pressure to increase packing load in the rare event of O-ring damage
- Dual body joint seals: primary resilient stem packing for zero leakage in standard service; secondary graphite packing to API 607 at extreme temperatures
- Anti-static devices ensure electrical continuity between ball, stem and body, preventing static discharge
- Valve position indicator clearly stamped on the mounting flange identifies open/closed position
- Blowout-proof stem design prevents stem ejection under line pressure
اطلب عرض سعر لـ Series 1B Trunnion Mounted Ball Valve
أرسل المقاسات ونوع الاتصال وظروف التشغيل. نرد بالسعر ومدة التسليم ونطاق الوثائق خلال يوم عمل واحد.