産業のお客様向けブレイ弁・アクチュエータ・制御機器
Series 1B Trunnion Mounted Ball Valve

Series 1B Trunnion Mounted Ball Valve

The Bray trunnion mounted ball valve combines advanced sealing technology with rugged construction for critical pipeline service. - ISO 5211 mounting pad for easy automation - Emergency stem sealant injection: a.

Series 1B型式
Ball Valvesカテゴリ
Brayブランド
主要仕様
Size Range 2 to 24" (50 – 600mm)
Body Materials ASTM A105, ASTM A350 Gr. LF2, ASTM A182 Gr F316
Temperature Range -50 to 600°F (-45 to 315°C)
Stem Materials ASTM A479 Type 410; 17-4PH; XM-19; ASTM A182 F316
ご注文情報
納期7~15日
最小注文数量≥1

技術仕様

The Bray trunnion mounted ball valve combines advanced sealing technology with rugged construction for critical pipeline service.

  • ISO 5211 mounting pad for easy automation
  • Emergency stem sealant injection: a standard feature allowing sealant injection through the stem housing in emergencies
  • Optional emergency seat sealant injection at the end connections to handle seat leakage from debris or upset conditions
  • Drain and vent ports: the drain port at the bottom of the body releases trapped cavity liquid; the vent port at the top releases trapped gas — essential in double block & bleed and double isolation & bleed configurations
  • Double block & bleed relieves cavity pressure build-up even with the valve fully closed
  • Fire-safe design: secondary metal seats provide API 607 fire-safe shut-off, with secondary graphite stem and body packing preventing leakage
  • Trunnion design: upper and lower bearing plates hold the ball in position, preventing axial float and seat overload; external trunnions on some sizes
  • Pressure-responsive stem packing: a patented energiser ring above the primary O-ring stem packing uses line pressure to increase packing load in the rare event of O-ring damage
  • Dual body joint seals: primary resilient stem packing for zero leakage in standard service; secondary graphite packing to API 607 at extreme temperatures
  • Anti-static devices ensure electrical continuity between ball, stem and body, preventing static discharge
  • Valve position indicator clearly stamped on the mounting flange identifies open/closed position
  • Blowout-proof stem design prevents stem ejection under line pressure
Size Range 2 to 24" (50 – 600mm)
Body Materials ASTM A105, ASTM A350 Gr. LF2, ASTM A182 Gr F316
Temperature Range -50 to 600°F (-45 to 315°C)
Stem Materials ASTM A479 Type 410; 17-4PH; XM-19; ASTM A182 F316
Maximum Allowable Operating Pressure ASME CL150, 300, 600, 900, 1500
Seat Materials RPTFE, Nylon, Devlon, PEEK, Tek-Fil, TFM
Shutoff Rating Zero Leakage
Ball Materials ASTM A105 w/ENP; ASTM A350 Gr. LF2 w/ENP; ASTM A182 Gr. F316; ASTM A182 Gr. F316 w/ENP
Body Style Two Piece, Three Piece
Design Standard API 6D, ASME B16.34
End Connections Flanged, Butt Weld
Testing Standard API 598, API 6D
Certifications API 607, ISO 15848-1
Ports Full
Face to Face ASME B16.10
Fugitive Emissions Standard ISO 15848-1, ISO 15848-2
applications Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals, Emergency Shutdown, Suction and Discharge Isolation, Block and Bypass, Pumping, Compression and Reinjection Units, Metering Stations, Pig Traps, Surge-Relief Skids, Decoking Isolation, Buried Services, Produced Water (Brine) Services

特長と利点

  • ISO 5211 mounting pad for easy automation
  • Emergency stem sealant injection: a standard feature allowing sealant injection through the stem housing in emergencies
  • Optional emergency seat sealant injection at the end connections to handle seat leakage from debris or upset conditions
  • Drain and vent ports: the drain port at the bottom of the body releases trapped cavity liquid; the vent port at the top releases trapped gas — essential in double block & bleed and double isolation & bleed configurations
  • Double block & bleed relieves cavity pressure build-up even with the valve fully closed
  • Fire-safe design: secondary metal seats provide API 607 fire-safe shut-off, with secondary graphite stem and body packing preventing leakage
  • Trunnion design: upper and lower bearing plates hold the ball in position, preventing axial float and seat overload; external trunnions on some sizes
  • Pressure-responsive stem packing: a patented energiser ring above the primary O-ring stem packing uses line pressure to increase packing load in the rare event of O-ring damage
  • Dual body joint seals: primary resilient stem packing for zero leakage in standard service; secondary graphite packing to API 607 at extreme temperatures
  • Anti-static devices ensure electrical continuity between ball, stem and body, preventing static discharge
  • Valve position indicator clearly stamped on the mounting flange identifies open/closed position
  • Blowout-proof stem design prevents stem ejection under line pressure

Series 1B Trunnion Mounted Ball Valve のお見積り依頼

口径・接続方法・使用条件をお知らせください。1営業日以内に価格・納期・添付書類の範囲をご返信します。

Recently viewed

お見積りまたは技術資料が必要ですか?

仕様をお送りください。1営業日以内にご返信します。

お見積り依頼