産業のお客様向けブレイ弁・アクチュエータ・制御機器
Series 941 Uni-Directional Knife Gate Valve

Series 941 Uni-Directional Knife Gate Valve

The Bray Series 941 knife gate valve offers metal and soft seated options to meet a wide range of uni-directional sealing requirements. Whether handling clean, dirty, corrosive, abrasive, viscous or high-temperature.

Series 941型式
Knife Gate & Pinch Valvesカテゴリ
Brayブランド
主要仕様
Size Range NPS 2 to 24 / DN 50 to 600
Body Materials Carbon Steel (WCB), CF8 Stainless Steel, CF8M Stainless Steel, CF3M Stainless Steel, SAF 2205 Duplex, SAF 2507 Duplex
Maximum Allowable Operating Pressure 150psi (10bar)
Body Style Single piece, Lug
ご注文情報
納期7~15日
最小注文数量≥1

技術仕様

The Bray Series 941 knife gate valve offers metal and soft seated options to meet a wide range of uni-directional sealing requirements. Whether handling clean, dirty, corrosive, abrasive, viscous or high-temperature media, the radiused gate edge extends packing life and enhances valve durability.

Designed for general on/off and isolation duty, the 941 provides reliable operation in stock preparation, liquor, hot gas, mining, petroleum products, process fluids and chemical applications. Optional enhancements include gate protection, open/close locking, limit switches, solenoids and fail-safe systems.

Size Range NPS 2 to 24 / DN 50 to 600
Body Materials Carbon Steel (WCB), CF8 Stainless Steel, CF8M Stainless Steel, CF3M Stainless Steel, SAF 2205 Duplex, SAF 2507 Duplex
Maximum Allowable Operating Pressure 150psi (10bar)
Body Style Single piece, Lug
Gate Materials 304 - 316 - 317 Stainless Steel, SAF 2507 Duplex, 17-4PH, Hastelloy® C, Monel®, Titanium
Design Standard MSS SP81
Testing Standard MSS SP151
Certifications ATEX, CRN, PED, PE(S)R, TR CU, UA TR
Face to Face MSS SP81
Actuator Options Handwheel, Bevel Gear, Pneumatic, Hydraulic, Lever, Electric

特長と利点

  • A. Topworks: Topworks designed for easy, quick conversion between manual and pneumatic actuation. Manual valves include a lubricant injection port for continuous, smooth operation with minimal maintenance.
  • B. Clevis: Clevis design and horizontal bolting stabilizes gate ensuring proper alignment.
  • C. Packing: Standard energized quad seal packing for enhanced gland sealing.
  • D. Seat: Standard integral metal seat and optional replaceable zero leakage resilient seats.
  • E. Gate (design): Gate design ensures consistent alignment throughout the length of the stroke.
  • F. Gate (durability): Rounded gate design enables longer packing life and increases valve durability.
  • G. Body: Unique body design with no dead pockets enables self-draining of valve.
  • H. Mounting: Lugged body suitable for all mounting orientations including dead-end service.
  • I. Yoke: Cast Yoke superstructure ensures robustness in valve design for different operators/orientation.

Series 941 Uni-Directional Knife Gate Valve のお見積り依頼

口径・接続方法・使用条件をお知らせください。1営業日以内に価格・納期・添付書類の範囲をご返信します。

Recently viewed

お見積りまたは技術資料が必要ですか?

仕様をお送りください。1営業日以内にご返信します。

お見積り依頼