産業のお客様向けブレイ弁・アクチュエータ・制御機器
Series 942 Vortex Breaker Knife Gate Valve

Series 942 Vortex Breaker Knife Gate Valve

The Bray Series 942 vortex breaker knife gate valve is designed for on/off isolation in pulp and paper reject and extraction applications, where strong shear capability is essential in high-cycle service with cyclones.

Series 942型式
Knife Gate & Pinch Valvesカテゴリ
Brayブランド
主要仕様
Size Range NPS 4 to 12 / DN 100 to 300
Maximum Allowable Operating Pressure 150psi (10Bar)
Body Style Single piece, Lug
Seat Material Temperature Range Up to 482°F (250°C)
ご注文情報
納期7~15日
最小注文数量≥1

技術仕様

The Bray Series 942 vortex breaker knife gate valve is designed for on/off isolation in pulp and paper reject and extraction applications, where strong shear capability is essential in high-cycle service with cyclones and high-density reject cleaners.

The 942 provides an engineered solution with a standard replaceable vortex breaker that disrupts cyclonic flow, preventing premature gate and body damage and ensuring long-term operating efficiency and reliability. The Hi-Chrome vortex breaker (500 HB) breaks up the cyclonic flow formed by rejects such as staples, wire, nails and sand, extending service life.

The Series 942 adapts to applications from knotters to reject sorters, pulpers, HD cleaners, cyclones and junk collectors.

Size Range NPS 4 to 12 / DN 100 to 300
Maximum Allowable Operating Pressure 150psi (10Bar)
Body Style Single piece, Lug
Seat Material Temperature Range Up to 482°F (250°C)
Packing Maximum Temperature Up to 482°F (250°C)
Certifications CE/PED
Actuator Options Pneumatic
Body Materials CF8M (316) Stainless Steel
Gate Materials 17-4PH H-1025
Design Standard MSS SP-81
Face to Face MSS SP-81
applications Pulp & Paper Recycle & Reject: Cyclone Separators, Knotters, Rejects, Pulpers, Scavengers and High Density Cyclone Cleaners

特長と利点

  • A. Topworks: Pneumatic actuator sized and designed for high cycle and ability to cut through heavy media.
  • B. Clevis: Clevis design and horizontal bolting stabilizes gate ensuring proper alignment and reducing failure points commonly found in knife gate valves.
  • C. Packing: High Performance packing system using a copper scraper and high performance packing, design includes machined packing chamber, live-loaded packing gland to assure extended cycle life and minimizes thrust of actuation.
  • D. Seat: Integral metal seat engineered for high cycle life.
  • E. Gate: Abrasion resistant 17-4PH H-1025 designed to shear through media such as staples, bands, plastics, and other type debris assuring full closure.
  • F. Body: Lug-Style Single Piece Stainless Body.
  • G. Vortex Breaker: Vortex Breaker is a replaceable wear component engineered to break cyclonic flow. Cast Hi-Chrome for increased performance and cycle life. Designed to support shear in cycle through media such as staples, bands, plastics and other type debris assuring the gate will cut through and cycle to the fully closed position.
  • H. Purge Ports: Purge ports in seat and chest area allow full flushing capability while cycling.
  • I. Yoke: Cast yoke superstructure robust design engineered for heavy duty actuators.

Series 942 Vortex Breaker Knife Gate Valve のお見積り依頼

口径・接続方法・使用条件をお知らせください。1営業日以内に価格・納期・添付書類の範囲をご返信します。

Recently viewed

お見積りまたは技術資料が必要ですか?

仕様をお送りください。1営業日以内にご返信します。

お見積り依頼