産業のお客様向けブレイ弁・アクチュエータ・制御機器
Series 32/33 Resilient Seated Butterfly Valve

Series 32/33 Resilient Seated Butterfly Valve

The Bray Series 32/33 elastomer-seated butterfly valve shares many of the features and benefits of Bray's smaller valves, including high Cv, minimum exposure of wetted parts to line media, high reliability and a proven.

Series 32/33型式
Butterfly Valvesカテゴリ
Brayブランド
主要仕様
Size Range NPS 22 to 36 / DN 550 to 900
Body Materials Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel
Temperature Range -20°F to 250°F (-29°C to 121°C)
Stem Materials Stainless Steel, Duplex Stainless Steel, Super Austenitic Stainless Steel, Monel
ご注文情報
納期7~15日
最小注文数量≥1

技術仕様

The Bray Series 32/33 elastomer-seated butterfly valve shares many of the features and benefits of Bray's smaller valves, including high Cv, minimum exposure of wetted parts to line media, high reliability and a proven long service life.

Its field-proven bi-directional seat provides bubble-tight shut-off at elevated pressures, making the 32/33 an effective sealing solution for process control systems.

Size Range NPS 22 to 36 / DN 550 to 900
Body Materials Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel
Temperature Range -20°F to 250°F (-29°C to 121°C)
Stem Materials Stainless Steel, Duplex Stainless Steel, Super Austenitic Stainless Steel, Monel
Maximum Allowable Operating Pressure Series 32: 75 psi (5 Bar) ; Series 33: 150 psi (10 Bar)
Seat Materials EPDM, BUNA-N, FKM*
Shutoff Rating Bidirectional Bubble-tight
Disc Materials Nylon 11 Coated Ductile Iron, Aluminum Bronze, Stainless Steel,; Duplex Stainless Steel, Super Austenitic Stainless Steel, Hastelloy®, Monel
Body Style Wafer
Flange Drilling ASME B16.1 Class 125, ASME B16.5 Class 150, ASME B16.47
Testing Standard MSS SP-61, API 598, EN 12266-1
Certifications ABS, ATEX, Bureau Veritas, DNV, NSF 61/372, PED, PE(S)R, SIL
Face to Face API 609 Category A, EN 558 Series 20
applications Wastewater, Seawater, Water, other liquids and gases

特長と利点

  • A. Blow-out Proof Stem: A retaining ring, installed between the machined stem groove and gland retainer step, provides full retention of the stem in the unlikely event of internal stem failure.
  • B. Adjustable Packing System: Design allows for field adjustment of stem packing without removing manual operators or power actuators. The advanced, self-adjusting V-Type stem packing prevents external substances from entering the upper stem bore.
  • C. Primary & Secondary Seals: These seals prevent line media from coming in contact with the stem or body. Primary Seal is achieved by an interference fit of the molded seat flat with the disc hub. Secondary Seal is created because the stem diameter is greater than the diameter of the seat stem hole.
  • D. Stem Bearings: To absorb actuator side thrust and minimize bearing friction torque, upper and lower heavy wall sleeve bearings are utilized.
  • E. Vertical Thrust Bearing: A bronze vertical thrust bearing eliminates disc displacement due to the weight of the stem and disc.
  • F. Body: One piece full flanged style. All bodies are drilled to be compatible with ASME 125/150, PN10, PN16 or other international flange standards. Wafer style bodies are also available.
  • G. Disc: High strength discs are first cast, the sealing edges are spherically machined then either hand polished or the entire disc is Nylon 11 coated. The symmetrical disc profile increases generic flow coefficient values,reduces turbulence and increases pressure recovery.
  • H. Seat: The replaceable tongue and groove seat to body retention method is the most advanced design in the industry. Molded O-ring eliminates the requirement of flange gaskets. The seat isolates the valve body and stem from line media and has been specifically designed to seal with slip-on or weld-neck flanges.

Series 32/33 Resilient Seated Butterfly Valve のお見積り依頼

口径・接続方法・使用条件をお知らせください。1営業日以内に価格・納期・添付書類の範囲をご返信します。

Recently viewed

お見積りまたは技術資料が必要ですか?

仕様をお送りください。1営業日以内にご返信します。

お見積り依頼