Series 942 Vortex Breaker Knife Gate Valve
The Bray Series 942 vortex breaker knife gate valve is designed for on/off isolation in pulp and paper reject and extraction applications, where strong shear capability is essential in high-cycle service with cyclones.
| Size Range | NPS 4 to 12 / DN 100 to 300 |
|---|---|
| Maximum Allowable Operating Pressure | 150psi (10Bar) |
| Body Style | Single piece, Lug |
| Seat Material Temperature Range | Up to 482°F (250°C) |
| Délai de livraison | 7–15 jours |
|---|---|
| Commande minimum | ≥1 |
Spécifications techniques
The Bray Series 942 vortex breaker knife gate valve is designed for on/off isolation in pulp and paper reject and extraction applications, where strong shear capability is essential in high-cycle service with cyclones and high-density reject cleaners.
The 942 provides an engineered solution with a standard replaceable vortex breaker that disrupts cyclonic flow, preventing premature gate and body damage and ensuring long-term operating efficiency and reliability. The Hi-Chrome vortex breaker (500 HB) breaks up the cyclonic flow formed by rejects such as staples, wire, nails and sand, extending service life.
The Series 942 adapts to applications from knotters to reject sorters, pulpers, HD cleaners, cyclones and junk collectors.
| Size Range | NPS 4 to 12 / DN 100 to 300 |
|---|---|
| Maximum Allowable Operating Pressure | 150psi (10Bar) |
| Body Style | Single piece, Lug |
| Seat Material Temperature Range | Up to 482°F (250°C) |
| Packing Maximum Temperature | Up to 482°F (250°C) |
| Certifications | CE/PED |
| Actuator Options | Pneumatic |
| Body Materials | CF8M (316) Stainless Steel |
| Gate Materials | 17-4PH H-1025 |
| Design Standard | MSS SP-81 |
| Face to Face | MSS SP-81 |
| applications | Pulp & Paper Recycle & Reject: Cyclone Separators, Knotters, Rejects, Pulpers, Scavengers and High Density Cyclone Cleaners |
Caractéristiques et avantages
- A. Topworks: Pneumatic actuator sized and designed for high cycle and ability to cut through heavy media.
- B. Clevis: Clevis design and horizontal bolting stabilizes gate ensuring proper alignment and reducing failure points commonly found in knife gate valves.
- C. Packing: High Performance packing system using a copper scraper and high performance packing, design includes machined packing chamber, live-loaded packing gland to assure extended cycle life and minimizes thrust of actuation.
- D. Seat: Integral metal seat engineered for high cycle life.
- E. Gate: Abrasion resistant 17-4PH H-1025 designed to shear through media such as staples, bands, plastics, and other type debris assuring full closure.
- F. Body: Lug-Style Single Piece Stainless Body.
- G. Vortex Breaker: Vortex Breaker is a replaceable wear component engineered to break cyclonic flow. Cast Hi-Chrome for increased performance and cycle life. Designed to support shear in cycle through media such as staples, bands, plastics and other type debris assuring the gate will cut through and cycle to the fully closed position.
- H. Purge Ports: Purge ports in seat and chest area allow full flushing capability while cycling.
- I. Yoke: Cast yoke superstructure robust design engineered for heavy duty actuators.
Demander un devis pour Series 942 Vortex Breaker Knife Gate Valve
Indiquez dimensions, type de raccordement et conditions de service. Réponse avec prix, délai et périmètre documentaire sous un jour ouvré.