Series 70-HAZ Electric Actuator
The Bray Series 70-Hazardous is designed with the control centre and power centre fully separated. The power centre is located in the actuator base and comprises the motor, gear train, capacitor, output drive and heater.
| Output Torque | 800 to 2,000 in-lb (90-226 Nm) |
|---|---|
| Control Options | IRB |
| Voltages | 120 VAC |
| Power Source | 120 VAC |
| Délai de livraison | 7–15 jours |
|---|---|
| Commande minimum | ≥1 |
Spécifications techniques
The Bray Series 70-Hazardous is designed with the control centre and power centre fully separated. The power centre is located in the actuator base and comprises the motor, gear train, capacitor, output drive and heater — each component designed to require no customer maintenance, protecting the electric drive system. The unique configuration of the power centre components keeps the Series 70 extremely low profile.
- Self-locking output drive: the self-locking worm and worm gear hold the valve in position without electric or mechanical braking; the worm shaft directly drives the wheel
- Mechanical travel stops: stainless steel stops field-adjustable to prevent overtravel during manual override, located outside the base for adjustment without removing covers, secured by stainless lock nuts with O-ring stem seals; factory set to 0° and 90°
- Manual override handwheel: pull for manual operation, rotate the handwheel to position the valve, push to return to electric operation. Bray's manual override ensures accurate, rapid manual operation without tools or control levers; an automatic power cutoff switch disconnects the motor while the handwheel is engaged, and a ball detent holds the override shaft in position
| Output Torque | 800 to 2,000 in-lb (90-226 Nm) |
|---|---|
| Control Options | IRB |
| Voltages | 120 VAC |
| Power Source | 120 VAC |
| Enclosure Ratings | Class I, DIV 1 & 2, Group C, D; Class II, DIV 1 & 2, Group E, F, G |
| Input Signal | 120 VAC |
| Communication Protocols | None |
| Mounting | ISO 5211 |
| Motor | 120 VAC: Single phase, reversible, permanent split capacitor induction motor |
| Temperature Range | -20°F to 150°F (-29°C to 65°C) |
| Switch Options | Up to 5 x SPDT max |
| Certifications | UL approved (USA & Canadian Std) for hazardous location (120V Only) |
| Switch Quantities | 2 standard, up to 5 maximum |
| Valve Compatibility | Quarter Turn Valve |
| applications | Hazardous Locations |
Caractéristiques et avantages
- Self-locking output drive: the self-locking worm and worm gear hold the valve in position without electric or mechanical braking; the worm shaft directly drives the wheel
- Mechanical travel stops: stainless steel stops field-adjustable to prevent overtravel during manual override, located outside the base for adjustment without removing covers, secured by stainless lock nuts with O-ring stem seals; factory set to 0° and 90°
- Manual override handwheel: pull for manual operation, rotate the handwheel to position the valve, push to return to electric operation. Bray's manual override ensures accurate, rapid manual operation without tools or control levers; an automatic power cutoff switch disconnects the motor while the handwheel is engaged, and a ball detent holds the override shaft in position
Demander un devis pour Series 70-HAZ Electric Actuator
Indiquez dimensions, type de raccordement et conditions de service. Réponse avec prix, délai et périmètre documentaire sous un jour ouvré.