Vannes, actionneurs et instrumentation Bray pour acheteurs industriels
Series 20/21 Resilient Seated Butterfly Valve

Series 20/21 Resilient Seated Butterfly Valve

The Bray Series 20/21 elastomer-seated butterfly valve exceeds the high standards demanded of food, beverage and chemical valve applications. - Series 20 wafer body with flange positioning holes - Series 21 lug body.

Series 20/21modèle
Butterfly Valvesfamille
Braymarque
Spécifications clés
Size Range NPS 1 to 20 / DN 25 to 500
Body Materials Cast Iron, Ductile Iron, Stainless Steel, Aluminum
Temperature Range -20°F to 400°F (-29°C to 204°C)
Stem Materials Stainless Steel, EPDM Molded over Stainless Steel, BUNA-N Molded over Stainless Steel
Informations de commande
Délai de livraison7–15 jours
Commande minimum≥1

Spécifications techniques

The Bray Series 20/21 elastomer-seated butterfly valve exceeds the high standards demanded of food, beverage and chemical valve applications.

  • Series 20 wafer body with flange positioning holes
  • Series 21 lug body for dead-end service
  • One-piece disc and stem
  • High Cv with low pressure drop

Certified for food, beverage and chemical service, the 20/21 delivers certified reliability where fluid efficiency matters.

Size Range NPS 1 to 20 / DN 25 to 500
Body Materials Cast Iron, Ductile Iron, Stainless Steel, Aluminum
Temperature Range -20°F to 400°F (-29°C to 204°C)
Stem Materials Stainless Steel, EPDM Molded over Stainless Steel, BUNA-N Molded over Stainless Steel
Maximum Allowable Operating Pressure 150 psi (10 Bar)
Seat Materials EPDM, BUNA-N, PTFE Lined EPDM, FKM, Polyurethane
Shutoff Rating Bidirectional Bubble-tight
Disc Materials Stainless Steel, EPDM Molded over Stainless Steel, BUNA-N Molded over Stainless Steel
Body Style Wafer, Lug
Design Standard MSS SP-67, API 609 Category A
Flange Drilling ASME B16.1 Class 125, ASME B16.5 Class 150, EN 1092 PN 10
Testing Standard MSS SP-61, API 598, EN 12266-1
Certifications ABS, ATEX, Bureau Veritas, DNV, NSF 61/372, PED, PE(S)R, SIL
Face to Face MSS SP-67, API 609 Category A, EN 558
applications Sanitary Service, Mildly Corrosive, Toxic Media

Caractéristiques et avantages

  • A. Stem Bushing: Non-corrosive, heavy duty acetal bushing absorbs actuator side thrust.
  • B. Stem Seal: Double "U" cup seal design is self-adjusting and gives positive sealing in both directions and prevents external substances from entering the stem bore.
  • C. Disc / Stem: One-piece design. The disc edge is spherically machined and hand polished to produce a bubble-tight shutoff, minimum torque, and longer seat life. The disc/stem design inherently provides complete protection from particle entrapment and bacterial decay, protection that is required for sanitary performance. For superior erosion and abrasion resistance, the one-piece disc/stem is fully encased in either EPDM or BUNA-N. The thin disc profile provides a much higher Cv (up to 50% greater than most through-stem designs) and greater pressure recovery, thus resulting in lower pressure drops and a more energy-efficient valve.
  • D. Primary & Secondary Seals: These seals prevent line media from coming in contact with the stem or body. Primary Seal is achieved by an interference fit of the molded seat flat with the disc hub. Secondary Seal is created because the stem diameter is greater than the diameter of the stem hole.
  • E. Seat: Bray's tongue and groove seat design lowers torque and provides complete isolation of flowing media from the body. The seat also features a molded O-ring which eliminates the use of flange gaskets.
  • F. Body: Two-piece wafer or lug style allows for ease of assembly and maintenance. Nylon 11 coating for excellent corrosion resistance is standard for 1"-8" valves and available on larger sizes upon request. Polyester coating is standard for 10"-20" bodies.

Demander un devis pour Series 20/21 Resilient Seated Butterfly Valve

Indiquez dimensions, type de raccordement et conditions de service. Réponse avec prix, délai et périmètre documentaire sous un jour ouvré.

Recently viewed

Besoin d'un devis ou d'une fiche technique ?

Envoyez votre cahier des charges, réponse sous un jour ouvré.

Demander un devis