Series 20/21 Resilient Seated Butterfly Valve
The Bray Series 20/21 elastomer-seated butterfly valve exceeds the high standards demanded of food, beverage and chemical valve applications. - Series 20 wafer body with flange positioning holes - Series 21 lug body.
| Size Range | NPS 1 to 20 / DN 25 to 500 |
|---|---|
| Body Materials | Cast Iron, Ductile Iron, Stainless Steel, Aluminum |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Stem Materials | Stainless Steel, EPDM Molded over Stainless Steel, BUNA-N Molded over Stainless Steel |
| 납기 | 7~15일 |
|---|---|
| 최소 주문 수량 | ≥1 |
기술 사양
The Bray Series 20/21 elastomer-seated butterfly valve exceeds the high standards demanded of food, beverage and chemical valve applications.
- Series 20 wafer body with flange positioning holes
- Series 21 lug body for dead-end service
- One-piece disc and stem
- High Cv with low pressure drop
Certified for food, beverage and chemical service, the 20/21 delivers certified reliability where fluid efficiency matters.
| Size Range | NPS 1 to 20 / DN 25 to 500 |
|---|---|
| Body Materials | Cast Iron, Ductile Iron, Stainless Steel, Aluminum |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Stem Materials | Stainless Steel, EPDM Molded over Stainless Steel, BUNA-N Molded over Stainless Steel |
| Maximum Allowable Operating Pressure | 150 psi (10 Bar) |
| Seat Materials | EPDM, BUNA-N, PTFE Lined EPDM, FKM, Polyurethane |
| Shutoff Rating | Bidirectional Bubble-tight |
| Disc Materials | Stainless Steel, EPDM Molded over Stainless Steel, BUNA-N Molded over Stainless Steel |
| Body Style | Wafer, Lug |
| Design Standard | MSS SP-67, API 609 Category A |
| Flange Drilling | ASME B16.1 Class 125, ASME B16.5 Class 150, EN 1092 PN 10 |
| Testing Standard | MSS SP-61, API 598, EN 12266-1 |
| Certifications | ABS, ATEX, Bureau Veritas, DNV, NSF 61/372, PED, PE(S)R, SIL |
| Face to Face | MSS SP-67, API 609 Category A, EN 558 |
| applications | Sanitary Service, Mildly Corrosive, Toxic Media |
특징 및 장점
- A. Stem Bushing: Non-corrosive, heavy duty acetal bushing absorbs actuator side thrust.
- B. Stem Seal: Double "U" cup seal design is self-adjusting and gives positive sealing in both directions and prevents external substances from entering the stem bore.
- C. Disc / Stem: One-piece design. The disc edge is spherically machined and hand polished to produce a bubble-tight shutoff, minimum torque, and longer seat life. The disc/stem design inherently provides complete protection from particle entrapment and bacterial decay, protection that is required for sanitary performance. For superior erosion and abrasion resistance, the one-piece disc/stem is fully encased in either EPDM or BUNA-N. The thin disc profile provides a much higher Cv (up to 50% greater than most through-stem designs) and greater pressure recovery, thus resulting in lower pressure drops and a more energy-efficient valve.
- D. Primary & Secondary Seals: These seals prevent line media from coming in contact with the stem or body. Primary Seal is achieved by an interference fit of the molded seat flat with the disc hub. Secondary Seal is created because the stem diameter is greater than the diameter of the stem hole.
- E. Seat: Bray's tongue and groove seat design lowers torque and provides complete isolation of flowing media from the body. The seat also features a molded O-ring which eliminates the use of flange gaskets.
- F. Body: Two-piece wafer or lug style allows for ease of assembly and maintenance. Nylon 11 coating for excellent corrosion resistance is standard for 1"-8" valves and available on larger sizes upon request. Polyester coating is standard for 10"-20" bodies.
Series 20/21 Resilient Seated Butterfly Valve 견적 문의
구경, 연결 방식, 사용 조건을 보내주시면 1영업일 이내에 가격, 납기, 서류 범위를 회신드립니다.