Vannes, actionneurs et instrumentation Bray pour acheteurs industriels
Series 35/36 Resilient Seated Butterfly Valve

Series 35/36 Resilient Seated Butterfly Valve

The Bray Series 35/36 elastomer-seated butterfly valve offers the same robust characteristics as the Series 32/33 while adding adjustable packing, increasing the maximum valve bore to 120" (3000 mm) and using a flexible.

Series 35/36modèle
Butterfly Valvesfamille
Braymarque
Spécifications clés
Size Range NPS 22 to 120 / DN 550 to 3000
Body Materials Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel
Temperature Range -20°F to 400°F (-29°C to 204°C)
Stem Materials 416 Stainless Steel
Informations de commande
Délai de livraison7–15 jours
Commande minimum≥1

Spécifications techniques

The Bray Series 35/36 elastomer-seated butterfly valve offers the same robust characteristics as the Series 32/33 while adding adjustable packing, increasing the maximum valve bore to 120" (3000 mm) and using a flexible design with a full-flanged body.

Certified and rigorously tested, these valves continue the Bray tradition of dependable performance and long service life.

Size Range NPS 22 to 120 / DN 550 to 3000
Body Materials Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel
Temperature Range -20°F to 400°F (-29°C to 204°C)
Stem Materials 416 Stainless Steel
Maximum Allowable Operating Pressure Series 35: 75 psi (5 bar); Series 36: 150 psi (10 bar)
Seat Materials EPDM, BUNA, and FKM
Shutoff Rating Bidirectional Bubble-tight
Disc Materials Nylon 11 Coated Ductile Iron, Aluminum Bronze, Stainless Steel, Duplex Stainless Steel, Super Austenitic Stainless Steel, Hastelloy®, Monel
Body Style Full Flanged
Flange Drilling ASME B16.1 Class 125, ASME B16.5 Class 150, ASME B16.47, EN 1092 PN 10, 16
Testing Standard MSS SP-61, API 598, EN 12266-1
Certifications ABS, ATEX, Bureau Veritas, DNV, NSF 61/372, PED, PE(S)R, SIL
Face to Face API 609 Category A, EN 558 Series 20
applications Water, Wastewater, Seawater, other liquids and gases

Caractéristiques et avantages

  • A. Blow-out Proof Stem: A retaining ring, installed between the machined stem groove and gland retainer step, provides full retention of the stem in the unlikely event of internal stem failure.
  • B. Adjustable Packing System: Design allows for field adjustment of stem packing without removing manual operators or power actuators. The advanced, self-adjusting V-Type stem packing prevents external substances from entering the upper stem bore.
  • C. Primary & Secondary Seals: These seals prevent line media from coming in contact with the stem or body. Primary Seal is achieved by an interference fit of the molded seat flat with the disc hub. Secondary Seal is created because the stem diameter is greater than the diameter of the seat stem hole.
  • D. Stem Bearings: To absorb actuator side thrust and minimize bearing friction torque, upper and lower heavy wall sleeve bearings are utilized.
  • E. Vertical Thrust Bearing: A brass vertical thrust bearing eliminates disc displacement due to the weight of the stem and disc.
  • F. Body: One piece full flanged style. All bodies are drilled to be compatible with ASME 125/150, PN10, PN16 or other international flange standards. Wafer style bodies are also available.
  • G. Disc: High strength discs are first cast, the sealing edges are spherically machined then either hand polished or the entire disc is Nylon 11 coated. The symmetrical disc profile increases CV values,reduces turbulence and increases pressure recovery.
  • H. Seat: The replaceable tongue and groove seat to body retention method is the most advanced design in the industry. Molded O-ring eliminates the requirement of flange gaskets. The seat isolates the valve body and stem from line media and has been specifically designed to seal with slip-on or weld-neck flanges.

Essais

Certified and rigorously tested, these valves continue the Bray tradition of dependable performance and long service life.

Demander un devis pour Series 35/36 Resilient Seated Butterfly Valve

Indiquez dimensions, type de raccordement et conditions de service. Réponse avec prix, délai et périmètre documentaire sous un jour ouvré.

Recently viewed

Besoin d'un devis ou d'une fiche technique ?

Envoyez votre cahier des charges, réponse sous un jour ouvré.

Demander un devis