صمامات Bray والمشغلات وأنظمة التحكم للمشترين الصناعيين
Series 941 Uni-Directional Knife Gate Valve

Series 941 Uni-Directional Knife Gate Valve

The Bray Series 941 knife gate valve offers metal and soft seated options to meet a wide range of uni-directional sealing requirements. Whether handling clean, dirty, corrosive, abrasive, viscous or high-temperature.

Series 941الموديل
Knife Gate & Pinch Valvesالفئة
Brayالعائلة
المواصفات الرئيسية
Size Range NPS 2 to 24 / DN 50 to 600
Body Materials Carbon Steel (WCB), CF8 Stainless Steel, CF8M Stainless Steel, CF3M Stainless Steel, SAF 2205 Duplex, SAF 2507 Duplex
Maximum Allowable Operating Pressure 150psi (10bar)
Body Style Single piece, Lug
معلومات الطلب
مدة التسليم7–15 يومًا
الحد الأدنى للطلب≥1

المواصفات الفنية

The Bray Series 941 knife gate valve offers metal and soft seated options to meet a wide range of uni-directional sealing requirements. Whether handling clean, dirty, corrosive, abrasive, viscous or high-temperature media, the radiused gate edge extends packing life and enhances valve durability.

Designed for general on/off and isolation duty, the 941 provides reliable operation in stock preparation, liquor, hot gas, mining, petroleum products, process fluids and chemical applications. Optional enhancements include gate protection, open/close locking, limit switches, solenoids and fail-safe systems.

Size Range NPS 2 to 24 / DN 50 to 600
Body Materials Carbon Steel (WCB), CF8 Stainless Steel, CF8M Stainless Steel, CF3M Stainless Steel, SAF 2205 Duplex, SAF 2507 Duplex
Maximum Allowable Operating Pressure 150psi (10bar)
Body Style Single piece, Lug
Gate Materials 304 - 316 - 317 Stainless Steel, SAF 2507 Duplex, 17-4PH, Hastelloy® C, Monel®, Titanium
Design Standard MSS SP81
Testing Standard MSS SP151
Certifications ATEX, CRN, PED, PE(S)R, TR CU, UA TR
Face to Face MSS SP81
Actuator Options Handwheel, Bevel Gear, Pneumatic, Hydraulic, Lever, Electric

الميزات والمزايا

  • A. Topworks: Topworks designed for easy, quick conversion between manual and pneumatic actuation. Manual valves include a lubricant injection port for continuous, smooth operation with minimal maintenance.
  • B. Clevis: Clevis design and horizontal bolting stabilizes gate ensuring proper alignment.
  • C. Packing: Standard energized quad seal packing for enhanced gland sealing.
  • D. Seat: Standard integral metal seat and optional replaceable zero leakage resilient seats.
  • E. Gate (design): Gate design ensures consistent alignment throughout the length of the stroke.
  • F. Gate (durability): Rounded gate design enables longer packing life and increases valve durability.
  • G. Body: Unique body design with no dead pockets enables self-draining of valve.
  • H. Mounting: Lugged body suitable for all mounting orientations including dead-end service.
  • I. Yoke: Cast Yoke superstructure ensures robustness in valve design for different operators/orientation.

اطلب عرض سعر لـ Series 941 Uni-Directional Knife Gate Valve

أرسل المقاسات ونوع الاتصال وظروف التشغيل. نرد بالسعر ومدة التسليم ونطاق الوثائق خلال يوم عمل واحد.

Recently viewed

هل تحتاج عرض سعر أو ورقة بيانات؟

أرسل مواصفاتك وسنرد خلال يوم عمل واحد.

اطلب عرض سعر