صمامات Bray والمشغلات وأنظمة التحكم للمشترين الصناعيين
Series 22/23 Lined Butterfly Valve

Series 22/23 Lined Butterfly Valve

The Bray Series 22/23 lined butterfly valve uses a state-of-the-art design to provide excellent sealing protection (bubble-tight shut-off) together with high Cv and exceptionally long service life. Engineered to.

Series 22/23الموديل
Butterfly Valvesالفئة
Brayالعائلة
المواصفات الرئيسية
Size Range NPS 2 to 24 / DN 50 to 600
Body Materials Ductile Iron, Carbon Steel, Stainless Steel
Temperature Range 0°F to 392°F (-18°C to 200°C)
Stem Materials 17-4 PH Stainless Steel
معلومات الطلب
مدة التسليم7–15 يومًا
الحد الأدنى للطلب≥1

المواصفات الفنية

The Bray Series 22/23 lined butterfly valve uses a state-of-the-art design to provide excellent sealing protection (bubble-tight shut-off) together with high Cv and exceptionally long service life.

Engineered to withstand highly aggressive chemicals, the 22/23 is available with a wide range of body and liner materials including PTFE, PFA, stainless steel, UHMWPE and special alloys to meet individual customer requirements — a corrosion-resistant, long-life solution for the toughest media.

Size Range NPS 2 to 24 / DN 50 to 600
Body Materials Ductile Iron, Carbon Steel, Stainless Steel
Temperature Range 0°F to 392°F (-18°C to 200°C)
Stem Materials 17-4 PH Stainless Steel
Maximum Allowable Operating Pressure 150 psi (10 Bar)
Seat Materials PTFE, Conductive PTFE, UHMWPE
Shutoff Rating Bidirectional Bubble-tight
Disc Materials Stainless Steel, PTFE/SS, PFA/SS, UHMWPE/SS, UHMWPE/DI, Hastelloy®, Titanium
Body Style Wafer, Lug
Flange Drilling ASME B16.1 Class 125, ASME B16.5 Class 150, EN 1092 PN 10, 16
Testing Standard MSS SP-61, API 598, EN 12266-1
Seat Energizer Material Silicone | FKM
Certifications ABS, ATEX, Bureau Veritas, DNV, PED, PE(S)R, SIL
Face to Face MSS SP-67, API 609 Category A, EN 558 Series 20

الميزات والمزايا

  • A. Top Stem Bushing: A top stem bushing, retained by a stainless steel ring, is provided to absorb actuator side thrusts and is acetal as standard or PTFE as an option.
  • B. Upper Stem Seal: The upper stem seal serves to keep any environmental contaminants from entering the stem bore.
  • C. Body: Bodies are two piece wafer or lug style and are polyester coated. All bodies meet full ASME Class 150 pressure ratings for hydrostatic requirements.
  • D. Bearings: PTFE impregnated steel bearings provided for precision alignment of the upper and lower stem.
  • E. Primary Seal: The primary seal is achieved by an interference fit between the extra wide disc hubs and contoured seat.
  • F. Seat Design: The seat design reduces seating/unseating torque and, at the same time, reduces wear on the contacting parts. Curvatures machined into the inner seat area minimize contact forces between the disc and seat as the disc approaches, or opens from, the closed position. This unique seat geometry permits lower torques and reduces seat wear.
  • G. Seat Energizer: A resilient seat energizer extends completely around the seat, including the disc hub. This provides uniform force sufficient for bubble-tight shut off.
  • H. Neck: An extended neck design in all valve sizes allows for 2" (50 mm) of piping insulation and provides easy access for mounting actuators.
  • I. Flange Locating Holes: Locating holes in the wafer version provide quick and precise alignment during valve installation eliminating disc interference with adjacent pipe internal diameter.
  • J. Blowout Proof Stem: A shoulder is machined into the upper stem. The stem and the disc are pressed together during assembly to become one part, thus the design is a positive stem-to-disc drive connection.
  • K. Disc: The lined disc has 1/8" (3 mm) minimum thickness of pure, virgin PTFE or PFA encapsulated over Stainless Steel.

اطلب عرض سعر لـ Series 22/23 Lined Butterfly Valve

أرسل المقاسات ونوع الاتصال وظروف التشغيل. نرد بالسعر ومدة التسليم ونطاق الوثائق خلال يوم عمل واحد.

Recently viewed

هل تحتاج عرض سعر أو ورقة بيانات؟

أرسل مواصفاتك وسنرد خلال يوم عمل واحد.

اطلب عرض سعر