صمامات Bray والمشغلات وأنظمة التحكم للمشترين الصناعيين
Series 31U Resilient Seated Butterfly Valve

Series 31U Resilient Seated Butterfly Valve

The Bray Series 31U elastomer-seated butterfly valve is designed for onshore and offshore firefighting applications and is approved to D.O.T. 54 (UK Ministry of Trade). The 31U is built to withstand high line.

Series 31Uالموديل
Butterfly Valvesالفئة
Brayالعائلة
المواصفات الرئيسية
Size Range NPS 2 to 12 / DN 50 to 300
Body Materials Ductile Iron, Carbon Steel, Nickel Aluminum Bronze
Temperature Range 0°F to 212°F (-18°C to 100°C)
Stem Materials Stainless Steel, 17-4PH Stainless Steel, Monel K500
معلومات الطلب
مدة التسليم7–15 يومًا
الحد الأدنى للطلب≥1

المواصفات الفنية

The Bray Series 31U elastomer-seated butterfly valve is designed for onshore and offshore firefighting applications and is approved to D.O.T. 54 (UK Ministry of Trade).

The 31U is built to withstand high line velocities and pressures while maintaining bubble-tight shut-off, making it a reliable choice for high-pressure industrial and marine safety duties.

Size Range NPS 2 to 12 / DN 50 to 300
Body Materials Ductile Iron, Carbon Steel, Nickel Aluminum Bronze
Temperature Range 0°F to 212°F (-18°C to 100°C)
Stem Materials Stainless Steel, 17-4PH Stainless Steel, Monel K500
Maximum Allowable Operating Pressure 285 psi (20 Bar)
Seat Materials Bonded BUNA-N
Shutoff Rating Bidirectional Bubble-tight
Disc Materials 316 Stainless Steel, Monel K500, Nickel Aluminum Bronze
Body Style Lug
Flange Drilling ASME Class 150, EN 1092 PN 10, 16, 25
Testing Standard API 598, EN 12266-1
Certifications ABS, ATEX, CRN, DNV, D.O.T. 54, NSF 61/372, PED, PE(S)R
Face to Face API 609 Category A, EN 558 Series 20
applications High Pressure Industrial and Marine Dead-End service,; On-Shore and Off-Shore Fire Protection

الميزات والمزايا

  • A. Modular Design: All Bray manual gear operators, electric and pneumatic actuators mount directly to the S31U, with no brackets required.
  • B. Stem Bushing: Non-corrosive heavy duty acetal bushing absorbs actuator side thrust.
  • C. Stem Seal: Patented stem retaining ring and C-rings prevent unintentional removal of the stem during field service.
  • D. Seat Design: Bray's bonded tongue and groove resilient seat design offers lower torque than many valves on the market today and provides complete isolation of flowing media from all valve components (excluding the disc) by a totally encasing design. The seat features a molded tangential O-ring eliminating any need for flange gaskets.
  • E. Primary & Secondary Seals: These seals prevent line media from coming in contact with the stem or body. Primary Seal is achieved by an interference fit of the molded seat flat with the disc hub. Secondary Seal is created because the stem diameter is greater than the diameter of the seat stem hole.
  • F. Neck: Extended neck length allows for piping insulation and is easily accessible for mounting operators.
  • G. Body: One piece lugged style flange configuration, with a choice of Polyester Coated Ductile Iron/Carbon Steel or uncoated Nickel Aluminum Bronze. All bodies can be drilled to be compatible with ASME 125/150, PN10/16 or other international flange standards.
  • H. Stem: High Strength upper and lower stem incorporate a close tolerance double 'D' disc drive connection. This eliminates stem retention components being exposed to the line media and allows for easy disassembly for maintenance purposes, unlike disc screws and taper pins.
  • I. Disc: Casting is spherically machined and hand polished to provide bubble-tight shutoff with minimum torque and an extended seat life.

الاختبار

The Bray Series 31U elastomer-seated butterfly valve is designed for onshore and offshore firefighting applications and is approved to D.O.T.

اطلب عرض سعر لـ Series 31U Resilient Seated Butterfly Valve

أرسل المقاسات ونوع الاتصال وظروف التشغيل. نرد بالسعر ومدة التسليم ونطاق الوثائق خلال يوم عمل واحد.

Recently viewed

هل تحتاج عرض سعر أو ورقة بيانات؟

أرسل مواصفاتك وسنرد خلال يوم عمل واحد.

اطلب عرض سعر