Series 1B Trunnion Mounted Ball Valve
The Bray trunnion mounted ball valve combines advanced sealing technology with rugged construction for critical pipeline service. - ISO 5211 mounting pad for easy automation - Emergency stem sealant injection: a.
| Size Range | 2 to 24" (50 – 600mm) |
|---|---|
| Body Materials | ASTM A105, ASTM A350 Gr. LF2, ASTM A182 Gr F316 |
| Temperature Range | -50 to 600°F (-45 to 315°C) |
| Stem Materials | ASTM A479 Type 410; 17-4PH; XM-19; ASTM A182 F316 |
| Срок поставки | 7–15 дней |
|---|---|
| Минимальный заказ | ≥1 |
Технические характеристики
The Bray trunnion mounted ball valve combines advanced sealing technology with rugged construction for critical pipeline service.
- ISO 5211 mounting pad for easy automation
- Emergency stem sealant injection: a standard feature allowing sealant injection through the stem housing in emergencies
- Optional emergency seat sealant injection at the end connections to handle seat leakage from debris or upset conditions
- Drain and vent ports: the drain port at the bottom of the body releases trapped cavity liquid; the vent port at the top releases trapped gas — essential in double block & bleed and double isolation & bleed configurations
- Double block & bleed relieves cavity pressure build-up even with the valve fully closed
- Fire-safe design: secondary metal seats provide API 607 fire-safe shut-off, with secondary graphite stem and body packing preventing leakage
- Trunnion design: upper and lower bearing plates hold the ball in position, preventing axial float and seat overload; external trunnions on some sizes
- Pressure-responsive stem packing: a patented energiser ring above the primary O-ring stem packing uses line pressure to increase packing load in the rare event of O-ring damage
- Dual body joint seals: primary resilient stem packing for zero leakage in standard service; secondary graphite packing to API 607 at extreme temperatures
- Anti-static devices ensure electrical continuity between ball, stem and body, preventing static discharge
- Valve position indicator clearly stamped on the mounting flange identifies open/closed position
- Blowout-proof stem design prevents stem ejection under line pressure
| Size Range | 2 to 24" (50 – 600mm) |
|---|---|
| Body Materials | ASTM A105, ASTM A350 Gr. LF2, ASTM A182 Gr F316 |
| Temperature Range | -50 to 600°F (-45 to 315°C) |
| Stem Materials | ASTM A479 Type 410; 17-4PH; XM-19; ASTM A182 F316 |
| Maximum Allowable Operating Pressure | ASME CL150, 300, 600, 900, 1500 |
| Seat Materials | RPTFE, Nylon, Devlon, PEEK, Tek-Fil, TFM |
| Shutoff Rating | Zero Leakage |
| Ball Materials | ASTM A105 w/ENP; ASTM A350 Gr. LF2 w/ENP; ASTM A182 Gr. F316; ASTM A182 Gr. F316 w/ENP |
| Body Style | Two Piece, Three Piece |
| Design Standard | API 6D, ASME B16.34 |
| End Connections | Flanged, Butt Weld |
| Testing Standard | API 598, API 6D |
| Certifications | API 607, ISO 15848-1 |
| Ports | Full |
| Face to Face | ASME B16.10 |
| Fugitive Emissions Standard | ISO 15848-1, ISO 15848-2 |
| applications | Oil and Gas Pipeline, Offshore Platforms, Onshore Terminals, Emergency Shutdown, Suction and Discharge Isolation, Block and Bypass, Pumping, Compression and Reinjection Units, Metering Stations, Pig Traps, Surge-Relief Skids, Decoking Isolation, Buried Services, Produced Water (Brine) Services |
Особенности и преимущества
- ISO 5211 mounting pad for easy automation
- Emergency stem sealant injection: a standard feature allowing sealant injection through the stem housing in emergencies
- Optional emergency seat sealant injection at the end connections to handle seat leakage from debris or upset conditions
- Drain and vent ports: the drain port at the bottom of the body releases trapped cavity liquid; the vent port at the top releases trapped gas — essential in double block & bleed and double isolation & bleed configurations
- Double block & bleed relieves cavity pressure build-up even with the valve fully closed
- Fire-safe design: secondary metal seats provide API 607 fire-safe shut-off, with secondary graphite stem and body packing preventing leakage
- Trunnion design: upper and lower bearing plates hold the ball in position, preventing axial float and seat overload; external trunnions on some sizes
- Pressure-responsive stem packing: a patented energiser ring above the primary O-ring stem packing uses line pressure to increase packing load in the rare event of O-ring damage
- Dual body joint seals: primary resilient stem packing for zero leakage in standard service; secondary graphite packing to API 607 at extreme temperatures
- Anti-static devices ensure electrical continuity between ball, stem and body, preventing static discharge
- Valve position indicator clearly stamped on the mounting flange identifies open/closed position
- Blowout-proof stem design prevents stem ejection under line pressure
Запросить КП на Series 1B Trunnion Mounted Ball Valve
Укажите размеры, тип присоединения и условия работы. В течение одного рабочего дня ответим с ценой, сроком и составом документации.