Series M4 Severe Service Ball Valve
The Bray Series M4 severe service ball valve is designed for isolation in power plant vent and drain applications. Rigorously tested for reliable zero leakage on/off service in high-pressure, high-temperature steam and.
기술 사양
| Size Range | NPS ½ to 2½ SW or BW / DN 15 to 65; NPS 3 to 4 BW / DN 80 to 100 |
|---|---|
| Body Materials | A105, A182-F22 Cl. 3, A182-F91/F92 |
| Temperature Range | Up to 1100°F (593°C) |
| Stem Materials | 431 Stainless Steel/QPQ, Inconel® 718 |
| Maximum Allowable Operating Pressure | ASME CL1700, 3100, 4500 ; NPS ½ to 2½: Limited Class, NPS 3 to 4: Standard Class |
| Seat Materials | 410 SS/HVOF Chromium Carbide, Inconel® 718 Spray & Fused Chromium Carbide |
| Shutoff Rating | Zero Leakage |
| Ball Materials | 410 SS/HVOF Chromium Carbide, Inconel® 718/HVOF Chromium Carbide |
| Bore Sizes | 0.63", 1.03", 1.56" |
| Design Standard | ASME B16.34, Bore sizes per ASME TDP-1, PED |
| End Connections | Socket Weld (ASME B16.11), Butt Weld (ASME B16.25), Flanged & Special |
| Testing Standard | Meets and exceeds API 598, MSS SP 61 or Per Customer Request |
| Certifications | CRN, PED, PE(S)R, TSG, TR CU, UA TR |
| Ports | Full & Reduced available, compliance to ASME TDP-1 available |
| Face to Face | Manufacturer's Standard. Custom Upon Request |
| Body Style | Unibody / One piece |
| applications | Power plant steam vents & drains, isolation or blowdown of steam, water, and other high temperature and/or high pressure clean medias |
Product description
The Bray Series M4 severe service ball valve is designed for isolation in power plant vent and drain applications. Rigorously tested for reliable zero leakage on/off service in high-pressure, high-temperature steam and superheated steam, M4 vent and drain valves ensure maintenance-free operation under the most extreme conditions.
M4 is ideally suited to conventional and combined cycle power generation, nuclear plant balance-of-plant, cogeneration, boiler drains, feedwater drains, header drains, turbine drains, above and below seat vent ports, superheater vents and drains, drum vents, sootblower isolation, bypass isolation and economiser header drains, plus special applications including motorised pressure relief vents on request.
The M4 uses advanced technology including a one-piece body, heavy-duty trunnion system, 360° lapped ball and seats with high-velocity oxy-fuel (HVOF) spray-and-fuse hard coating options, and live-loaded packing with Belville springs. Ball and seats share identical materials and coatings, so identical thermal expansion rates ensure reliable tight shut-off and low seat stress through thermal cycling — maintenance-free even in high-cycle applications.
Manufactured in Bray's ISO 9001:2015 facility with full traceability including MTRs, M4 meets PED 97/23/EC Annex III Module H, TSG, CRN and TDP-1 requirements. M4 products are stocked for fast worldwide delivery supporting MRO, turnaround and planned outage intervals and new plant construction. Zero leakage is defined as no detectable or visible gas or liquid leakage for three minutes or longer; all pressure parts are fully traceable.
특징 및 장점
- A.: Utilizing the same material and coating composition for the ball and seat, both parts expand at the same rate during thermal cycling, ensuring reliable tight shutoff.; ; The ball and seat are 360° mate-lapped to create a truly spherical interface, eliminating irregularities found with traditional mate-lapping techniques. ; Wider sealing surfaces reduce dynamic cycling stresses promoting extended valve life and tight shutoff
- B.: Forged heavy walled unibody construction eliminates the body joint and any potential for shell leakage.; ; CNC machined for utmost accuracy. ; Transitioning angles maximize flow rates.
- C.: Cast steel bracket with increased thickness for superior rigidity.; ; CNC machined to fully align the body, bracket, and stem, eliminating side to side motion. ; Permanently attached bracket.
- D.: High strength one piece stem with upper bearing ring.; ; Ensures proper alignment.; Extends valve life and maximizes stem sealing by limiting stem side loading. ; Prevents stem blow-out.
- E.: Robust ISO 5211 mounting flange supports direct mounting of high temperature actuators or conventional adaptation for standard actuators.
- F.: Inconel® 718 Belleville spring exerts continuous force onto the ball and seat maintaining the seal throughout operating temperatures.
- G.: Set of Inconel® 718 Belleville springs live load the stem packing for low maintenance leak prevention.
- H.: External body groove effectively dissipates conductive heat during the postweld heat treatment (PWHT) process.
시험
구경, 연결 방식, 사용 조건을 보내주시면 1영업일 이내에 가격, 납기, 서류 범위를 회신드립니다.