産業のお客様向けブレイ弁・アクチュエータ・制御機器
Back to product
Bray
Bray Technical datasheet
Generated 2026-11-20

Series M4 Severe Service Ball Valve

モデル Series M4 Ball Valves Bray
Series M4 Severe Service Ball Valve

The Bray Series M4 severe service ball valve is designed for isolation in power plant vent and drain applications. Rigorously tested for reliable zero leakage on/off service in high-pressure, high-temperature steam and.

技術仕様

Size Range NPS ½ to 2½ SW or BW / DN 15 to 65; NPS 3 to 4 BW / DN 80 to 100
Body Materials A105, A182-F22 Cl. 3, A182-F91/F92
Temperature Range Up to 1100°F (593°C)
Stem Materials 431 Stainless Steel/QPQ, Inconel® 718
Maximum Allowable Operating Pressure ASME CL1700, 3100, 4500 ; NPS ½ to 2½: Limited Class, NPS 3 to 4: Standard Class
Seat Materials 410 SS/HVOF Chromium Carbide, Inconel® 718 Spray & Fused Chromium Carbide
Shutoff Rating Zero Leakage
Ball Materials 410 SS/HVOF Chromium Carbide, Inconel® 718/HVOF Chromium Carbide
Bore Sizes 0.63", 1.03", 1.56"
Design Standard ASME B16.34, Bore sizes per ASME TDP-1, PED
End Connections Socket Weld (ASME B16.11), Butt Weld (ASME B16.25), Flanged & Special
Testing Standard Meets and exceeds API 598, MSS SP 61 or Per Customer Request
Certifications CRN, PED, PE(S)R, TSG, TR CU, UA TR
Ports Full & Reduced available, compliance to ASME TDP-1 available
Face to Face Manufacturer's Standard. Custom Upon Request
Body Style Unibody / One piece
applications Power plant steam vents & drains, isolation or blowdown of steam, water, and other high temperature and/or high pressure clean medias

Product description

The Bray Series M4 severe service ball valve is designed for isolation in power plant vent and drain applications. Rigorously tested for reliable zero leakage on/off service in high-pressure, high-temperature steam and superheated steam, M4 vent and drain valves ensure maintenance-free operation under the most extreme conditions.

M4 is ideally suited to conventional and combined cycle power generation, nuclear plant balance-of-plant, cogeneration, boiler drains, feedwater drains, header drains, turbine drains, above and below seat vent ports, superheater vents and drains, drum vents, sootblower isolation, bypass isolation and economiser header drains, plus special applications including motorised pressure relief vents on request.

The M4 uses advanced technology including a one-piece body, heavy-duty trunnion system, 360° lapped ball and seats with high-velocity oxy-fuel (HVOF) spray-and-fuse hard coating options, and live-loaded packing with Belville springs. Ball and seats share identical materials and coatings, so identical thermal expansion rates ensure reliable tight shut-off and low seat stress through thermal cycling — maintenance-free even in high-cycle applications.

Manufactured in Bray's ISO 9001:2015 facility with full traceability including MTRs, M4 meets PED 97/23/EC Annex III Module H, TSG, CRN and TDP-1 requirements. M4 products are stocked for fast worldwide delivery supporting MRO, turnaround and planned outage intervals and new plant construction. Zero leakage is defined as no detectable or visible gas or liquid leakage for three minutes or longer; all pressure parts are fully traceable.

特長と利点

試験

Rigorously tested for reliable zero leakage on/off service in high-pressure, high-temperature steam and superheated steam, M4 vent and drain valves ensure maintenance-free operation under the most extreme conditions.
Quotation and documentation

口径・接続方法・使用条件をお知らせください。1営業日以内に価格・納期・添付書類の範囲をご返信します。

22244579@qq.com +86 138 5000 1310 https://www.braybfv.com

お見積りまたは技術資料が必要ですか?

仕様をお送りください。1営業日以内にご返信します。

お見積り依頼