Series 98C Compact Scotch Yoke Actuator
The compact Series 98C scotch yoke actuator continues Bray's commitment to products that exceed demanding application requirements. Using the proven technology of the large Series 98 scotch yoke actuator — tested to.
| Output Torque | Up to 17,701 lbf-in (2,000 Nm) |
|---|---|
| Control Options | On/Off, Direct Acting, Spring Return |
| Temperature Range | Standard: -20°F to 200°F (-29°C to 93°C) ; High Temperature: Up to 300°F (149°C); Low Temperature: Down to -50°F (-46°C) |
| Mounting | ISO 5211: 2001(E) |
| Délai de livraison | 7–15 jours |
|---|---|
| Commande minimum | ≥1 |
Spécifications techniques
The compact Series 98C scotch yoke actuator continues Bray's commitment to products that exceed demanding application requirements. Using the proven technology of the large Series 98 scotch yoke actuator — tested to 1,000,000 cycles — the 98C provides a range of compact scotch yoke actuators with output torque up to 17,701 lbf-in (2,000 Nm), easily covering common quarter-turn valve sizes from 2" to 20".
Standard 98C valve adapters include two easily adapted ISO 5211 mounting faces with a square drive output, fitting any quarter-turn valve. Converting from clockwise fail to counter-clockwise fail is as simple as flipping the actuator and remounting. A VDI/VDE 3845 accessory mounting plate allows easy installation of switch boxes, sensors or positioners for position feedback to plant host systems.
The 98C is a long-term performance partner — maximising uptime, shortening repair cycles and delivering optimal function. Maintenance is simple: replacing soft components sustains peak performance for years. Multiple power sources in your facility? No problem — the 98C operates on pneumatic or hydraulic power, and where electricity is the only energy source, it can be configured with Bray's electro-hydraulic power pack for independent, emission-free operation.
| Output Torque | Up to 17,701 lbf-in (2,000 Nm) |
|---|---|
| Control Options | On/Off, Direct Acting, Spring Return |
| Temperature Range | Standard: -20°F to 200°F (-29°C to 93°C) ; High Temperature: Up to 300°F (149°C); Low Temperature: Down to -50°F (-46°C) |
| Mounting | ISO 5211: 2001(E) |
| Supply Media | Dry Compressed Air/Inert Gas/Natural Gas |
| Power Source | Dry Compressed Air / Inert / Natural Gas |
| Certifications | ATEX, SIL 3 suitable, PED ; On request: API 6DX |
| Maximum Allowable Operating Pressure | 40 - 150 psi (2.8 - 10.3 bar) |
| Enclosure Ratings | IP66, IP67M & IP68 per IEC 60529 |
| Testing Standard | In accordance with EN 15714-3 |
| Valve Compatibility | Ball Valves, Butterfly Valves |
| Accessories | Shaft Driven Accessories Mounting per NAMUR-VDE |
| applications | Open / Close, On / Off, Modulating, Emergency Shutdown, Blowdown |
Caractéristiques et avantages
- A. ISO 5211 Valve Mounting:: Two bolting surfaces for rapid integration in either Fail CW or CCW valve operation.
- B. Dual Male Square Drive Stems:: Provides easy integration with various valve types ensuring compatibility and reducing installation complexity.
- C. Standard NAMUR 3845 Interface:: Attached to the actuator ISO 5211 interface, easily convertible to support either Fail CW or Fail CCW configurations.
- D. Blowout-proof Travel Stop:: Provides additional safety by minimizing risk of actuator damage caused by operator error during travel stop adjustment or mechanical failure.
- E. Honed and Hard Chrome Plated Cylinder Barrel:: Improves actuator efficiency by reducing friction while providing superior corrosion resistance.
- F. Quad Seal Rings:: Ensure long-term sealing reliability, reducing maintenance requirements and extending the product’s lifecycle.
- G. Pressure Seals:: Reduced number of pressure seals contributes to a more robust and reliable actuator design, reducing potential for unintended air leak paths.
- H. Hard Chrome Plated Piston Rod:: Increases surface hardness which improves wear resistance of the piston rod and provides a smooth corrosion resistant surface for prolonged bearing and seal life.
- I. Self-lubricating PTFE bushings:: Supports the torque shaft and piston rod offering extended life and secure alignment.
- J. Dry Film Lubricated Roller Bearings:: Reduces friction and provides superior performance in demanding applications.
- K. Dual Accessory Mounting Pads:: For attaching actuator accessories and controls.
Demander un devis pour Series 98C Compact Scotch Yoke Actuator
Indiquez dimensions, type de raccordement et conditions de service. Réponse avec prix, délai et périmètre documentaire sous un jour ouvré.