How to select a butterfly valve for industrial service
Seat material, body style and pressure class decide most of the specification. A practical checklist for buyers.
Butterfly valves are the default isolation choice for large bore water and HVAC lines, but the specification details decide whether the valve lasts ten years or ten months.
Start with the seat material
EPDM suits water and steam up to 120C, NBR handles oils and fuels, and PTFE lined seats are required for aggressive chemicals.
Body style follows the pipe
Wafer valves are the lowest cost option and fit between most flanges. Lugged bodies allow dead end service. Double flanged bodies are preferred where the valve must be removed without spreading the pipe.
Check the actuator interface
If automation is likely, specify an ISO 5211 mounting pad from the start. Retrofitting is possible but costs more than ordering it.
Нужна помощь с техническим заданием?
Отправьте условия работы, и мы подтвердим модель, материалы и срок поставки.
Запросить предложениеДругие технические заметки
Four symptoms of a failed steam trap
Live steam loss, cold equipment, waterhammer and cycling noise all point to different failure modes.