Vannes, actionneurs et instrumentation Bray pour acheteurs industriels
05 十一月 2026 · valveplaza engineering

How to select a butterfly valve for industrial service

Seat material, body style and pressure class decide most of the specification. A practical checklist for buyers.

Butterfly valves are the default isolation choice for large bore water and HVAC lines, but the specification details decide whether the valve lasts ten years or ten months.

Start with the seat material

EPDM suits water and steam up to 120C, NBR handles oils and fuels, and PTFE lined seats are required for aggressive chemicals.

Body style follows the pipe

Wafer valves are the lowest cost option and fit between most flanges. Lugged bodies allow dead end service. Double flanged bodies are preferred where the valve must be removed without spreading the pipe.

Check the actuator interface

If automation is likely, specify an ISO 5211 mounting pad from the start. Retrofitting is possible but costs more than ordering it.

Besoin d'aide pour une spécification ?

Envoyez les conditions de service et nous confirmerons le modèle, les matériaux et le délai.

Demander un devis

Autres notes techniques

Besoin d'un devis ou d'une fiche technique ?

Envoyez votre cahier des charges, réponse sous un jour ouvré.

Demander un devis