産業のお客様向けブレイ弁・アクチュエータ・制御機器
05 十一月 2026 · valveplaza engineering

How to select a butterfly valve for industrial service

Seat material, body style and pressure class decide most of the specification. A practical checklist for buyers.

Butterfly valves are the default isolation choice for large bore water and HVAC lines, but the specification details decide whether the valve lasts ten years or ten months.

Start with the seat material

EPDM suits water and steam up to 120C, NBR handles oils and fuels, and PTFE lined seats are required for aggressive chemicals.

Body style follows the pipe

Wafer valves are the lowest cost option and fit between most flanges. Lugged bodies allow dead end service. Double flanged bodies are preferred where the valve must be removed without spreading the pipe.

Check the actuator interface

If automation is likely, specify an ISO 5211 mounting pad from the start. Retrofitting is possible but costs more than ordering it.

仕様のご相談はありますか?

使用条件をお送りいただければ、型式・材質・納期を確認してご連絡します。

お見積り依頼

その他の技術ノート

お見積りまたは技術資料が必要ですか?

仕様をお送りください。1営業日以内にご返信します。

お見積り依頼