Bray
Technical datasheet
Generated 2026-11-20
Series 70 Electric Actuator
الموديل Series 70
Actuators
Bray
Drawing on decades of success in electric actuation combined with innovative engineering, the Bray Series 70 electric actuator offers on/off or modulating control with advantages over other actuators. - Output torque.
المواصفات الفنية
| Output Torque | 120/230V: 300 to 18,000 in-lb (34-2034 Nm); 24V: 600 in-lb (68 Nm); 2000 in-lb (226 Nm); 5000 in-lb (565 Nm) |
|---|---|
| Control Options | On-Off: 120/230 VAC Interposing Relay Board (I.R.B.); 24V: AC/DC Controller ; Modulating: Servo NXT Controller; Communication Protocols: Servo NXT DeviceNet, EtherNet/IP |
| Voltages | 120, 230 VAC 50/60 Hz, 1-phase; 24V: AC/DC |
| Power Source | 24-27VAC or 30-38VDC; 70-DNS: VAC:120; 70-NXT: 120/220 VAC 50/60Hz, 24V AC/DC |
| Enclosure Ratings | NEMA 4, 4X and IP65, IP67 |
| Input Signal | On-Off: 120/230 VAC; 24V: AC/DC; Modulating: 4-20 mA; 0-10V, 0-5V, 2-10V |
| Mounting | ISO 5211 |
| Motor | 120/230 VAC: Single phase, reversible, permanent split capacitor induction motor; 24V: Permanent magnet-brush DC motor |
| Temperature Range | -20°F (-29°C) to 150°F (+65°) |
| Switch Options | 2 SPDT mechanical switches standard; Additional auxiliary switches available (up to 6 total); Optional torque switches available. |
| Certifications | UL, CSA and CE approved (most 120V models); 70-24V: x | CE approved |
| Valve Compatibility | Quarter Turn Valve |
Product description
Drawing on decades of success in electric actuation combined with innovative engineering, the Bray Series 70 electric actuator offers on/off or modulating control with advantages over other actuators.
- Output torque from 300 in-lb (34 Nm) to 18,000 in-lb (2,034 Nm)
- Most units UL, CSA and CE certified
- Connects directly to the terminal board without interference from other components
- Simple, unique manual override handwheel system
- The lowest profile, lightest weight actuator on the market
- Travel limit cams adjustable by finger or screwdriver without disturbing other components
- High-visibility valve position indication (heartbeat) available on most units
Designed for reliable on/off or modulating electric control (300-18,000 in-lb), the Series 70 delivers peak efficiency in Bray's most compact electric actuator — UL, CSA and CE certified.
الميزات والمزايا
- A. Enclosure: The low profile weatherproof actuator is UL listed Type 4, 4x and IP65. Polyester powder coated die-cast aluminum cover and base, for exceptional corrosion, wear, impact and ultraviolet resistance.
- B. High Visibility Position Indicator: Prominently labeled and color coded yellow for open, red for close – the display indicates valve position through the full range of travel. The O ring sealed dome is made of high impact, heat, chemical and ultraviolet resistant clear polycarbonate and designed to withstand caustic wash down ensuring excellent corrosion protection.
- C. Captive Cover Bolts: The cover is attached to the base by captive stainless-steel bolts placed outside the sealing area.
- D. O-ring Seal for Watertight Enclosure: The O-ring seal between the cover and base provides a weatherproof seal preventing internal corrosion.
- E. Manual Override: Standard on all models. The declutch-able manual override prevents handwheel movement during motor operation. When manual operation is desired, pull the handwheel out exposing a yellow stripe around the handwheel shaft. This indicates the handwheel is engaged and manual operation is available.
- F. Manual Override Switch: Interrupts power to the motor when handwheel operation is engaged. The manual override operates like a watch adjusting knob. To engage the manual override, simply pull the handwheel to its outermost position. A yellow stripe is revealed to visually indicate manual override engagement.
- G. Conduit Entries: Two connections in either NPT or metric threads. One entry is for power, the other for control wiring.
- H. Motor Gear: High torque start motor assembly. Designed for fast inspection and maintenance.
- I. Output Drive: Self-locking worm shaft and worm gear assembly holds the valve in desired position.
- J. Mechanical Travel Stop Bolts: Designed to prevent over-travel in the open or close direction during manual operation. Travel stop bolts include a locknut to prevent loosening, seals to prevent water ingress, and spacers to prevent adjustment between 0° and 90° limit switch settings. Travel stop bolts permit 5° of over travel.
- K. Terminal Strip: On standard models, the actuator limit switches are pre-wired to an easily accessible and clearly marked terminal strip for customer wiring. The terminal strip has been placed near the two conduit entries with ample room for running wire leads. An easily accessible green plated ground screw is provided. A wiring diagram is included inside the cover for easy reference.
- L. Limit Switch Bracket: Simple and secure design to firmly hold limit switch assemblies for accurate and repeatable valve position feedback.
- M. Limit Switch Cams: Bray’s patented CAM design includes standard green (open) and red (close) CAMs which are adjustable with finger touch or screwdriver with no additional tools. Standard factory setting allows 90° travel between open and close positions.
- N. Roller Bearings: Provides low friction while securely aligning actuator indicator shaft and CAMs for reliable valve position feedback.
- O. Oldham Coupler: Corrects any misalignment between the valve and actuator without introducing side load to the position indicator shaft assembly.
- P. Interposing Relay Board (IRB): Available on 120/220 VAC 50/60Hz On/Off control versions, the IRB prevents back feeding of control from one actuator by another one wired in parallel.
- Q. Servo-NXT: • Modulating Controller: 120, 220, 1 phase 24 VDC; • 24V On/Off Controller; • See below for additional details
Quotation and documentation
أرسل المقاسات ونوع الاتصال وظروف التشغيل. نرد بالسعر ومدة التسليم ونطاق الوثائق خلال يوم عمل واحد.
22244579@qq.com
+86 138 5000 1310
https://www.braybfv.com