صمامات Bray والمشغلات وأنظمة التحكم للمشترين الصناعيين
Series 63 Solenoid Valve

Series 63 Solenoid Valve

The Bray Series 63 solenoid valve is designed for direct mounting on Bray Series 92/93 pneumatic actuators, providing on/off control of the valve package. UL and CSA certified, and all Series 63 solenoids carry CE.

Series 63الموديل
Control Accessoriesالفئة
Brayالعائلة
المواصفات الرئيسية
Connections NPT and IP65 DIN connections offered with both single and dual coils
Ports 1/4" NPT
Operating Pressure High Flow: Min. 22 psi (1.5 bar) Max. 130 psi (9 bar); UL-Recognized: Min. 30 psi (2 bar), Max. 130 psi (9 bar)
Supply Media Clean dry air
معلومات الطلب
مدة التسليم7–15 يومًا
الحد الأدنى للطلب≥1

المواصفات الفنية

The Bray Series 63 solenoid valve is designed for direct mounting on Bray Series 92/93 pneumatic actuators, providing on/off control of the valve package. UL and CSA certified, and all Series 63 solenoids carry CE marking — an excellent choice for general purpose and hazardous location applications.

Features:

  • Compact design with NAMUR interface reduces installation cost and complexity
  • Suitable for double acting and single acting pneumatic actuators
  • 5/2 or 3/2-way function selectable via interchangeable port plates; the 3/2 version can use a closed-loop configuration exhausting air to the spring side of the actuator, protecting it from corrosion
  • Rotating and locking manual override
  • Wide range of AC and DC supply voltages

Options: explosion-proof coils to Class I Division 1; dual or single coil; flying leads and DIN connections; compatible with other Bray devices supporting industrial communication protocols including CommPro and S54.

Manual override and multiple voltage options for precise control — an explosion-proof solenoid solution for hazardous areas.

Connections NPT and IP65 DIN connections offered with both single and dual coils
Ports 1/4" NPT
Operating Pressure High Flow: Min. 22 psi (1.5 bar) Max. 130 psi (9 bar); UL-Recognized: Min. 30 psi (2 bar), Max. 130 psi (9 bar)
Supply Media Clean dry air
Mounting Direct NAMUR mount. VDI/VDE 3845
Temperature Range AC: -13°F (-25°C) to +140°F (+60°C); DC: -13°F (-25°C) to +77°F (+25°C)
Enclosure Ratings Weatherproof models: NEMA 4, 4X; Hazardous location models
Duty Cycle Continuous
Control Options Convertible From 3-way (3/2) to 4-way (5/2)
Certifications CSA, CE, UL (some models only)

الميزات والمزايا

  • Compact design with NAMUR interface reduces installation cost and complexity
  • Suitable for double acting and single acting pneumatic actuators
  • 5/2 or 3/2-way function selectable via interchangeable port plates; the 3/2 version can use a closed-loop configuration exhausting air to the spring side of the actuator, protecting it from corrosion
  • Rotating and locking manual override
  • Wide range of AC and DC supply voltages

الاختبار

UL and CSA certified, and all Series 63 solenoids carry CE marking — an excellent choice for general purpose and hazardous location applications.

اطلب عرض سعر لـ Series 63 Solenoid Valve

أرسل المقاسات ونوع الاتصال وظروف التشغيل. نرد بالسعر ومدة التسليم ونطاق الوثائق خلال يوم عمل واحد.

Recently viewed

هل تحتاج عرض سعر أو ورقة بيانات؟

أرسل مواصفاتك وسنرد خلال يوم عمل واحد.

اطلب عرض سعر